-
F3 Limited - Rear Panel for LinQ
>> UPDATE - Just saw an old post with some speculation but no definitive answer. <<
Hi all,
Sorry if this has been asked previously, for anyone who has purchased or looked into the 2020 F3 Limited - Do you know if there is a Rear Panel for purchase, either as an OEM or third party? I thought perhaps the LinQ system was to create some universal parts but now I see that all the system is for is quick release. It would be nice when soloing or just going around the area, the top case could be removed with a nice cover to replace it.
I asked my local dealer and they no idea, couldn't find anything from BRP.
Thanks!
RJ
-
Very Active Member
Yes, there is a colour coordinated cover shown in several of the 2020 CanAm walk around videos, RJ. Hop on to YouTube and do a search for 2020RT walk around (Or similar)..... you lift off the trunk, and pop on the cover.
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
Found it...... removal at 2:15.
https://youtu.be/eLWM1Fp4eNw
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
@Peteoz thank you so much, I had to edit my post to a typo. This is for the F3 Limited not RT.
-
Very Active Member
Originally Posted by diverd
@Peteoz thank you so much, I had to edit my post to a typo. This is for the F3 Limited not RT.
I’ll check a couple of other videos I have, but I can’t imagine they wouldn’t have a cover for the F3 as well, RJ.
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
-
Active Member
This is the part number 708302912 the rear cover of an F3T only comes in black this is the best I could find on brp oem parts. You can find it under body and cargo accessories.
https://can-am.brp.com/on-road/us/en...ts-iframe.html
-
SpyderLovers Sponsor
I have one in black. Pm if interested. Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Are all 2020 F3Ts LinQ compliant?
-
Thank you everyone for the research and help!
-
Very Active Member
Originally Posted by Rattlebars
Yeah, but that is for the 2017, not the 2020 with the LinQ system, Rattlebars.
Pete
Last edited by Peter Aawen; 07-13-2020 at 12:08 AM.
Reason: Fixed quote display
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
Originally Posted by diverd
Thank you everyone for the research and help!
Did you see Joe’s definitive post above, RJ?
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
Originally Posted by Rattlebars
Originally Posted by Peteoz
Yeah, but that is for the 2017, not the 2020 with the LinQ system, Rattlebars.
Pete
I thot it was the 2020. Musta copied the wrong link
https://www.youtube.com/watch?v=eLWM1Fp4eNw&t=2m10s
Last edited by Peter Aawen; 07-13-2020 at 12:11 AM.
Reason: Fixed quote display
-
I looked at doing that on mine... I think all it might take is removing the topcase and then also removing the LinQ bracket. I put a topcase on my wifes F3T and the places that the cover would go are all still there but whether the old style or the LinQ style, the topcase bracket would need to be removed to put a cover on..
-
Was there a solution? I'm looking for a rear panel for a 2021 F3-L. I can't seem to find anything
-
Very Active Member
Originally Posted by MONK
Are all 2020 F3Ts LinQ compliant?
The 2020 F3L we just purchased (mfg. in 1/2020) came with the link system. The trunk is much different than the one on our 2019 F3L.
I am guessing that these are the same trunks that are showing up on the 2020/21 RTL's. I was thinking of getting one of those covers and would like to take the trunk off for the "T" look, which I like.
Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.
Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)
MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles
IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
-
Very Active Member
Originally Posted by Showbiz
Was there a solution? I'm looking for a rear panel for a 2021 F3-L. I can't seem to find anything
I think this is it.
https://www.cheapcycleparts.com/oemp...k-rear-fairing
"Stupid is as Stupid does"
Don't Drink and Drive or Ryde!
Each Day is a Gift
-
Member
Just purchased a 2021 F3 Limited and wanting to do the same thing. Did https://www.cheapcycleparts.com/oemp...k-rear-fairing fit the bill?
-
Member
Found this on FB
-
looks like were getting to the bottom of this.. panel looks right, how many clips , how many rivets.. hummm thanks
2020 F3 limited, liquid titanium
grip puppies
Bajaron sway bar
lamonster belt dampener
battery tender
19 in freedom tinted windshield
matte black daytona frunk wrap
Quadtrac 165/60's
-
Member
Did anyone come up with the correct part(s) to remove the top box and replace with a panel on the 21’ F3L?
2021 F3L Black/Chrome
LAMonster:
Ultimate Backrest, Bottle Holder, Baja Ron Sway bar, Cat Delete Pipe, Freedom Windshield, Highway brackets/Black Demond pegs, Upgraded Tension Roller, FOBO Tire Pressure Monitor
TricLED:
Sequential LED Spyder Fender Lights, Run/Brake/Turn Strobe Light Kit, Brake flasher
SlingMods:
Chrome Luggage Rack
Pedal Commander
Spyder Accessories.com:
Tank Pad
Amazon:
Ciro phone holder/mount, Stebel Nautilus Air Horn/Wiring Kit, Short Reach Handlebar
-
I was at my dealer Tuesday for inspection, they had an F3L there missing the topcase, I asked parts guy if they made a cover, he said yes, black only - he looked it up on parts list... He said it was like $190.00 and would need push pins also, so around $200.00 or so... that's all I know.
Last edited by Peter Aawen; 07-01-2022 at 05:17 AM.
Reason: Caps & $'s ;-)
2020 F3 limited, liquid titanium
grip puppies
Bajaron sway bar
lamonster belt dampener
battery tender
19 in freedom tinted windshield
matte black daytona frunk wrap
Quadtrac 165/60's
-
Member
Thanks. I’ll reach out to get the scoop.
Last edited by Peter Aawen; 07-01-2022 at 07:36 AM.
Reason: t - to ;-)
2021 F3L Black/Chrome
LAMonster:
Ultimate Backrest, Bottle Holder, Baja Ron Sway bar, Cat Delete Pipe, Freedom Windshield, Highway brackets/Black Demond pegs, Upgraded Tension Roller, FOBO Tire Pressure Monitor
TricLED:
Sequential LED Spyder Fender Lights, Run/Brake/Turn Strobe Light Kit, Brake flasher
SlingMods:
Chrome Luggage Rack
Pedal Commander
Spyder Accessories.com:
Tank Pad
Amazon:
Ciro phone holder/mount, Stebel Nautilus Air Horn/Wiring Kit, Short Reach Handlebar
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|