-
Change the Brake Fluid & quoted $780.60 - Any suggestions?
I was just quoted 780.60$ to change brake fluid on the wife's 2010 rs se5 Spyder.. I had read various posts on the pros and cons of DIY bleeding the brakes. so I thought I would call and if not to expensive have it done by dealer to avoid any problems.
I would prefer not to take a second out on the house( lol) so any suggestions would be appreciated.
Hildy
-
Very Active Member
Lets see, Speedbleeders < $50 and Brake Fluid < $10. I would do it myself then the next changeout would be < $10.
-
Very Active Member
Speed Bleeders or not. It's not a difficult job. I'd do it myself...
Only SLOW people have to leave on time...
<a href='https://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=13' target='_blank'><img src='https://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=13&cb=7845674567' border='0' alt='' /></a>
-
Very Active Member
That’s a no brainer………… Its not that difficult as Ron said. No way would it take 8 hours of labor which it looks like they are charging you. We’ve done dads old 2014 which was SE6 but should be practically the same or darn close. There are videos out there. Not a big deal. NO WAY would I pay for $780 to change the brake fluid. Heck if your worried drain, fill test and do it a second time since you got practice and its perfect.
Here’s a great video with the SE6 explaining every part. Watch it. It’s not tough
https://www.youtube.com/watch?v=U_44e4oh-A0
Last edited by Wmoater; 03-29-2022 at 01:45 PM.
“Born to Ride......Ride to Live....MOATER ON !
“Current ride: 2017 RT Limited”
-
Very Active Member
Originally Posted by Hildy
I was just quoted 780.60$ to change brake fluid on the wife's 2010 rs se5 Spyder.. I had read various posts on the pros and cons of DIY bleeding the brakes. so I thought I would call and if not to expensive have it done by dealer to avoid any problems.
I would prefer not to take a second out on the house( lol) so any suggestions would be appreciated.
Hildy
As others have said not difficult and about $ 700.00 less than that Stealer..... If you are still concerned about doing it yourself .... any Half-*ssed mechanic can do this. The procedure is basically the same for almost ALL brake systems .... good luck .... Mike
-
I just did mine last weekend and it took about 30 minutes. Used Speed Bleeders and about 3/4 of a quarts of dot 4 fluid. Dealers are charging stupid prices right now and some have suggested it's there way of saying no to customers.
-
Very Active Member
If your not happy doing it yourself may be worth checking the price with a local brakes specialist rather than a Can-am dealer. I got one local to me to do both brake and clutch fluid (I had a manual RS), replace rear brake pads and generally check everything was good and they were very reasonable - plus they did it in quarter the time it normally takes me:-)
-
SpyderLovers Ambassador
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
SpyderLovers Ambassador
Over Price
Originally Posted by Hildy
I was just quoted 780.60$ to change brake fluid on the wife's 2010 rs se5 Spyder.. I had read various posts on the pros and cons of DIY bleeding the brakes. so I thought I would call and if not to expensive have it done by dealer to avoid any problems.
I would prefer not to take a second out on the house( lol) so any suggestions would be appreciated.
Hildy
MY answer to your question. This is an over price for the job. Need to check somewhere else. ....
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Originally Posted by Hildy
I was just quoted 780.60$ to change brake fluid on the wife's 2010 rs se5 Spyder.. I had read various posts on the pros and cons of DIY bleeding the brakes. so I thought I would call and if not to expensive have it done by dealer to avoid any problems.
I would prefer not to take a second out on the house( lol) so any suggestions would be appreciated.
Hildy
Was this quote from a Can Am dealer? Is this quote only for NEW Brake Fluid? If so, then it is way out of line!
But, the Spyder in mention is 12 years old, is this the first brake fluid change since its production date? How many years or miles since the last change? Does it need brake pads, rotors, or brake cylinder repairs? Maybe there are other factors not mentioned in this quote. I do not believe we are seeing the whole picture.........Bill
2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
BaJa Ron Ultra 3 pcs sway bar kit
10W40 Amsoil Synthetic Motorcycle oil
7jurock 25" tinted windscreen w/flip
Frogman Dave's "Signal Button"
If in Doubt, Don't Do It!
" Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"
-
I called both can am dealers in my town and asked what was the labor cost for a brake fluid change if I supplied the fluid. Both dealers quoted the same price. I have done bleeds before on vehicles without abs. so was asking because I didn't want to screw something up due to lack of knowledge.
Thanks for all the info.
Hildy
-
Very Active Member
Please don’t take this the wrong way (I’m not promoting this is correct technique) but if your not perfectly sure then there is another option. Bleed it like normal and empty everything. That’s a no brainer. Anyone can do that. Then tighten and fill up. Fill up everything with some extra and get another person to help you. Bleed one at a time and add more and pump at same time one at a time so the system is charged and pressurized. Let half the new fluid get wasted as it pumps out of each. Then fill again. Crack and pump one last time after all 3 done. Then you know it is full and pressurized. Add a little at the end. Again this is not the correct way and you are wasting an entire bottle and half but you know its pressurized and full when your done. at that quoted price heck you’re still $700 ahead. Honestly the bleeders make it easy and its a not hard. Watch the video I supplied above. Its pretty detailed.
Last edited by Wmoater; 03-30-2022 at 01:31 PM.
“Born to Ride......Ride to Live....MOATER ON !
“Current ride: 2017 RT Limited”
-
Very Active Member
Originally Posted by Hildy
I called both can am dealers in my town and asked what was the labor cost for a brake fluid change if I supplied the fluid. Both dealers quoted the same price. I have done bleeds before on vehicles without abs. so was asking because I didn't want to screw something up due to lack of knowledge.
Thanks for all the info.
Hildy
I did mine at home ..... Didn't do anything with / for the ABS .... they work great. ... The amount of Fluid in the ABS might be a couple of tablespoons full and when you change the fluid ( a flush ), whatever was in the ABS will just get mixed with the NEW fluid. ..... JMHO .... good luck .... Mike
-
Very Active Member
Originally Posted by Wmoater
Please don’t take this the wrong way (I’m not promoting this is correct technique) but if your not perfectly sure then there is another option. Bleed it like normal and empty everything. That’s a no brainer. Anyone can do that. Then tighten and fill up. Fill up everything with some extra and get another person to help you. Bleed one at a time and add more and pump at same time one at a time so the system is charged and pressurized. Let half the new fluid get wasted as it pumps out of each. Then fill again. Crack and pump one last time after all 3 done. Then you know it is full and pressurized. Add a little at the end. Again this is not the correct way and you are wasting an entire bottle and half but you know its pressurized and full when your done. at that quoted price heck you’re still $700 ahead. Honestly the bleeders make it easy and its a not hard. Watch the video I supplied above. Its pretty detailed.
It's important NOT to introduce air into the system 'and empty everything.' This will create trouble. With a syringe of some sort, remove as much old fluid from reservoirs as possible, fill with fresh fluid, bleed as normal until you're confident that the new fluid is through all three bleeders while ensuring the reservoirs remain topped up - then bleed the 4th one on top of the ABS/VSS unit under the middle of the trike, which is somewhat difficult to access. Ensure the ignition is NOT turned on until the process is completed.
Last edited by Freddy; 03-31-2022 at 01:04 AM.
The best substitute for brains & knowledge is....................silence.
-
You can do it yourself like I did. Start with the brake furthest from the resevoirs. Keep topping them up so you don't get any air in the system.
Don't forget to do the VSS, a block mounted in front of the engine on the center frame--you'll see brake lines going into it with a bleeder screw on top. Tight to access, but doable.
Good luck!
-
SpyderLovers Sponsor
Originally Posted by Hildy
I was just quoted 780.60$ to change brake fluid on the wife's 2010 rs se5 Spyder.. I had read various posts on the pros and cons of DIY bleeding the brakes. so I thought I would call and if not to expensive have it done by dealer to avoid any problems.
I would prefer not to take a second out on the house( lol) so any suggestions would be appreciated.
Hildy
GO GET ANOTHER QUOTE !!!!!! that is a giant ripoff
-
Originally Posted by Motorcycledave
GO GET ANOTHER QUOTE !!!!!! that is a giant ripoff
Exactly!
Here's a suggestion. If you feel uncomfortable DIY reach out to some other SL'er who's done it before and knows what they're doing. As mentioned many times above, it is not a difficult process. I'm sure someone in your area can/will help you out if you can't find a dealer who will give you a reasonable bid for the job. If we were closer and the weather was cooperating, I'd scoot up there and do it for you. Good luck.
-
Very Active Member
After seeing one of these I bought one. Works off your compressor. No need to get another person to pump the brake.
brake bleeder 07_101008.jpg
https://www.youtube.com/watch?v=B9bmqZarjpo
Last edited by Isopedella; 04-14-2022 at 05:03 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|