-
Voltage Meter
What type and where is a good place place to purchase a volt meter for a Spyder RT?
2021 RT Limited
Asphalt Grey
Lamonster RT phone mount
Sena SMH-10
Lamonster Belt Tensioner w/ larger roller
Spyderpops Missing Belt Guard
Garmin's GPS
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Originally Posted by Bfromla
I believe that one will be far too small. You need a 50mm, or 2" one. This is the one I put on my bike, although not the same seller:
https://www.ebay.com/itm/2-52mm-Digi...LH_TitleDesc=0
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Whatever you get it NEEDS to be digital.
Colored lights by themselves are useless.
And most analog gauges won't move the needle enough to get your attention; a drop of .5 volts can be SIGNIFICANT.
-
Originally Posted by bcer960
That is the one I just ordered. Thanks
2021 RT Limited
Asphalt Grey
Lamonster RT phone mount
Sena SMH-10
Lamonster Belt Tensioner w/ larger roller
Spyderpops Missing Belt Guard
Garmin's GPS
-
Where did you install it? What did you tap into? Thanx been looking for one...
-
Active Member
I also have the one from ebay. I put it in the old temp guage spot. It is nice to know how voltage is doing since just a little voltage drop can leave you sitting.
-
Very Active Member
Originally Posted by wilpir
Where did you install it? What did you tap into? Thanx been looking for one...
I put the voltmeter on the right and the clock on the left. I used the power that was there for the other gauges to power them.
ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Originally Posted by kamper
I also have the one from ebay. I put it in the old temp guage spot. It is nice to know how voltage is doing since just a little voltage drop can leave you sitting.
Don't you need a temperature gauge? Sorry I'm a newbie...
-
Very Active Member
Originally Posted by wilpir
Don't you need a temperature gauge? Sorry I'm a newbie...
If you remove BOTH the gas gauge and temp gauge, they will appear on your bash, digitally.
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Really? even on a 2012 RT? Did not know that, but you have to remove both?
-
Very Active Member
Originally Posted by wilpir
Really? even on a 2012 RT? Did not know that, but you have to remove both?
That is correct.
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Originally Posted by gerald37
What type and where is a good place place to purchase a volt meter for a Spyder RT?
i HAVE A 12v cigarette lighter in the front and put this one.Voltmeter.jpg
-
I was thinking the rocker switch one ..I have 1 empty switch space in my dash just don't want to take a lot of body panels off to wire it..
-
Originally Posted by bcer960
I put the voltmeter on the right and the clock on the left. I used the power that was there for the other gauges to power them.
ray
What clock did you install?
-
Very Active Member
Originally Posted by Beekeeper67
What clock did you install?
I just quickly looked for one on e-bay, there may be chaeper prices, but this is the clock I bought, and I am very happy with it.
https://www.horsepowerfreaks.com/-p-...RoCVhUQAvD_BwE
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Originally Posted by bcer960
Ray,
Thanks for the info!
Gary
-
Very Active Member
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
Found something related, yes requires app & wifi smart device.
http://products.batterytender.com/Ac...Y-MONITOR.html
Does not say much about heat protection on motorcycles, should be easier than mounting a volt meter in dash
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Active Member
I installed this one on my 2011 RT on the right side after removing the original water temp gage. I also installed their digital water temp gage where the old fuel gage was. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
-
Voltage Meter
Originally Posted by gerald37
What type and where is a good place place to purchase a volt meter for a Spyder RT?
Hi, I installed Red LED Intellitronix 9015R gauge, back in 2012 I believe, along with a Intellitronix 9014R red digital Oil pressure gauge in the dash next to the cluster on opposite sides . Intellitronix has a bright red display which is dimmable. I have tried others, this display is readable in bright sun light.
The DVM voltmeter I found is accurate to .1 volts and usually displays between 13.8 to 14.1 during driving dependent upon lights that are on and brake lights. The accuracy of mine I verified with my DVM fluke and bench DVM which is in calibration.
The GS & RS Spyders I believe the magneto is 750 watt while the RT is slightly larger capacity, both are controlled by a shunt regulator which clamps the voltage to about 14.1 on my GS.
eBay and JC Whitney I know are a couple of sources..
Ps the motor at idle above 13.0 volts. Yes, when you turn on the key after the Spyder has been parked for several days with no battery maintenance charger connected, it will probably be about 12.3 to 12.5 .
-
OZZ3 -- Did you install the S8434 oil pressure sender the 9014R gauge came with? If so what adapters did you use? Thanks.
-
Very Active Member
OZZ3 hasn't been to Spyderlovers since June, 2020, so you may not get a reply.
2017 F3 Limited in Intense Red Pearl
2008 Triumph Rocket (SOLD)
2002 Honda VTX 1800 C ( SOLD)
2014 Triumph Thunderbird Commander
-
Thanks. I noticed after I posted his engine wasn't my 1330cc. The service manual describes the test port which I think an oil sender can be threaded into and there seems to be enough room for the sender itself so no remote via hose needed.
-
Active Member
I got a rocker switch/usb port/voltmeter off amazon for 14$,just search it the way I said it.I put it in the unused slot where all the rockers are on my 17rt,yours may be different.Holds up fine in the rain too.
:
: 2017 RTL ORBITAL BLUE
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|