-
Sounds like great adventure. I was hoping to catch up with you at the Pac Nw Spyderfest this year for an alignment on my Ryker. Since you will not be attending that event can you suggest anyone else in the pacific northwest that can do an alignment for me?
-
SpyderLovers Sponsor
Originally Posted by dklehman
Sounds like great adventure. I was hoping to catch up with you at the Pac Nw Spyderfest this year for an alignment on my Ryker. Since you will not be attending that event can you suggest anyone else in the pacific northwest that can do an alignment for me?
We will be at the Norcal rally. September. Not too far from you. If you want it sooner, try Shawn Smoak in Portsmouth. Not sure if he still does them.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Sponsor
Originally Posted by d.o.spyder-rts
Congrats, any plans on stopping in Panama City? Dale
Our week of training is at the BRP facility in Melbourne. Then, our area is Texas, plus Houma, Hattiesburg, and Little Rock. We are going thru Panama City, probably the following week. I’ll find out if stops are allowed. Remember, we are representing BRP, and they set the schedule. When we work for ourselves, we are the boss. So, call me after 25 January, and I’ll know.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Sponsor
Originally Posted by IdahoMtnSpyder
Do you know how many other Experience Specialist teams will traveling around the country or is this a totally unique assignment for just for you two?
Our sector is controlled by a company with 4 other sectors. Our 5 are together. There are 6 other teams, deployed across the country. I’ll find out what I can, and share what they let me. I already pointed out folks are/will ask this very question! I hope to get a list of dealers and dates. Meanwhile, ask your dealer if they are doing it.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Sponsor
Originally Posted by IdahoMtnSpyder
Do you plan to have someone do alignments in your stead while you're on this adventure? I'd volunteer but I'm not in the best locale to serve the wider market. Besides, summertime is play time for me!
We only had 2 rallies on the radar for the next 6 months - Spyders on the Bayou, and PAC NW. We are back on the job come July. Deadwood, Texas, Florida. If other events materialize, we will go, and are always available for local clubs. We just did an event in Albuquerque (Rio Rancho), and will probably go to Tracy, CA. If it makes sense, we go.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Originally Posted by cptjam
Our week of training is at the BRP facility in Melbourne. Then, our area is Texas, plus Houma, Hattiesburg, and Little Rock. We are going thru Panama City, probably the following week. I’ll find out if stops are allowed. Remember, we are representing BRP, and they set the schedule. When we work for ourselves, we are the boss. So, call me after 25 January, and I’ll know.
I will make sure i make it down for the Hattiesburg event. Glad this is happening.
-
Very Active Member
Originally Posted by cptjam
Our week of training is at the BRP facility in Melbourne. Then, our area is Texas, plus Houma, Hattiesburg, and Little Rock. We are going thru Panama City, probably the following week. I’ll find out if stops are allowed. Remember, we are representing BRP, and they set the schedule. When we work for ourselves, we are the boss. So, call me after 25 January, and I’ll know.
The BRP test facility, not too remote but you may want Mosquito spray. Suspecting you will be logging some laps on the test track.
-
Melbourne, how cool. I'd spring for a day ride up there from Lakeland and an overnighter if there was something going on I could see. Will stay tuned to this thread for further information.
-
Very Active Member
Originally Posted by bikerbillone
Melbourne, how cool. I'd spring for a day ride up there from Lakeland and an overnighter if there was something going on I could see. Will stay tuned to this thread for further information.
Years ago, one of the group rides took us there. Was the weekend and the place was closed. Guessing security was working. Not much to see from the outside. A building and reasonably large fenced compound. Not sure, but would suspect that during the week you would be run off by security. Unless you had a drone, I doubt you could see much if anything from the nearest public road.
-
Hmmm, PMK good comment based on some history; to the layman, seems there's nothing to hide by BRP, the up side is the 2020 RT gets some good publicity but what do I know? Maybe there are other motives, restrict production, increase curiosity? Interested folks like me looking in through the restrictive bars don't have clue, and so I stay tuned looking for bits and pieces of reports that hopefully flow to this forum.
-
Very Active Member
Originally Posted by cptjam
We will be at the Norcal rally. September. Not too far from you. If you want it sooner, try Shawn Smoak in Portsmouth. Not sure if he still does them.
Shawn Smoaks works at Pro Caliber in Vancouver, WA on Fourth Plain Blvd. He posts videos on YouTube almost daily. Look up TheSmoaksVlogs.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
I subscribe to Smoaks You Tube, but not much going on with the Spyders, maybe he will get more interested as the time grows near for the 2020 RT appearance on show room floors.
-
Very Active Member
No Better People to do this!
Sounds like great fun Joe!
Have an Amazing time!!!
-
SpyderLovers Sponsor
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Originally Posted by bikerbillone
I subscribe to Smoaks You Tube, but not much going on with the Spyders, maybe he will get more interested as the time grows near for the 2020 RT appearance on show room floors.
He also does BMW's. He posts what he works on; if he gets several Spyders in for service, that's what you'll see. I'd imagine once the 2020's start rolling in and need assembly you'll see more Spyder content.
Trb-- (Roger)
2014 Cognac STL:Ultimate Seat, Nelson Rigg Tail Pack, Nelson Rigg RS/ST Half Cover, TL fender lights, Squared Away Laser Alignment, BajaRon sway bar and links, Akropovic Sport Silencer
2022 White Pearl F3T
Gone but not forgotten: 2019 F3S Special Series Liquid Titanium
Spyder States Visited
-
Oh yes, I know, I follow him, I want to see more Spyders, he did one today. I'm aware he has to fix BMWs to, so I have to be patient.
-
SpyderLovers Sponsor
Keep the questions coming! I don’t mind PM’s, but to share is good. Can’t wait to put hands on! In fact, any questions you have I can get answers for.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Very Active Member
Have they done anything to improve the belt tightening process?
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
SpyderLovers Sponsor
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Originally Posted by cptjam
Keep the questions coming! I don’t mind PM’s, but to share is good. Can’t wait to put hands on! In fact, any questions you have I can get answers for.
You'll probably be getting a few on the 2020, or if you see something that gets your attention, post right here on this forum, we will appreciate the info.
-
SpyderLovers Sponsor
Will do. Can’t wait! We have a lot to do to prepare, but think we have it under control. Adventure time!!!
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
By the way, thank you for your service from an 'old' Korean War veteran.
-
SpyderLovers Sponsor
My pleasure! Thank you for yours!
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Sponsor
Waiting on a connecting flight in ATL. Super excited, and we are going to the same town we lived in 21 years ago!!
Last edited by ARtraveler; 01-20-2020 at 12:01 PM.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Safe travels. BRP could not have picked a finer couple for there PR.
Take care,
Roger and Linda
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|