-
Stuck in R......
Today went for a ride. 3-4 times the bike when stopped wound up in neutral and I could not start it. Final straw is in the driveway I backed in and stopped in front of garage door, shut off key and went inside to remove jacket. Came back out and turn on key and it shows R on the dash but bike is in neutral (it will roll back and forth) but cannot start the bike!!!
Rocked it back and forth and still not start. I had to push it into the garage while the R showed on dash. What's going on?
Buckskin
-
Very Active Member
I am not shore but I think you have a safety switch that needs to be replaced or adjusted!!
-
Anybody got idea where that puppy is? What if any kind of adjustment is there?
-
Very Active Member
I know they like to use a lot of little micro switches on a lot of the items on the bike, like the brake peddle, e brake, there is one I think on the shifting linkage, but don't hold me to that!! Some one will chime in and help I am sure, or if you go to cheapcycleparts.com and look at the micro phish you may find some thing!! Good luck
-
Very Active Member
First go back to basics 1. kill switch in the correct position, click back and forth one time to make sure. 2. Foot on the Brake. 3. turn key to on, wait for and then hit the mode button. 4. Push start button. Many times we forget to do just one of them and we think it is the bike that failed. I have done the kill switch and forgot to step on the Brake more then once.
My Spyder
-
Ozzie Ozzie Ozzie
Last edited by Peter Aawen; 11-27-2019 at 05:54 PM.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
SpyderLovers Sponsor
Today went for a ride. 3-4 times the bike when stopped wound up in neutral and I could not start it.
so how did you get home?
CopperSpyder may be on the money
pres ride
2014 RT-S
bike is WIP
bike has endured elect spike (was jump started incorrectly)
still a WIP but bike is now running and registered....swapped out 5 modules mostly sourced from Canadian wrecker
-
Very Active Member
Might be related (or not). Lately, I have had a problem with the bike not waiting for me to press the ECO switch. It will start up with just the key on - brake - start button. It's odd and likely not related...
Check that your brake light comes on with the pedal. If not switch bad.
-
Anything back from rider on this. Would be nice for followup!
-
Active Member
HELP!!! I'm changing out my clutch lever MICRO SWITCH on a 2015 F3s 6 speed manual. Cant seem to locate the lower connector plug. If someone knows of it's location, it would be a great help. My F3S SHOP MANUAL nor cheapcycleparts site where the lower connector is located. I've removed panels, lower engine cover, etc but no luck. Pic would be great.
UPDATE: Found connector on right side of bike, FIXED.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|