-
Tire help needed in Tennessee
Hi all,
I have friends traveling through cookeville Tennessee and their 2014 RTL blew a rear tire and are in need of a tire change. They are trying to meet us in Jackson Wyoming and this is a major setback as nothing is open this Labor Day weekend. Any thoughts or suggestions would greatly be appreciated
Thank you
-
Very Active Member
Originally Posted by CKW19
Hi all,
I have friends traveling through cookeville Tennessee and their 2014 RTL blew a rear tire and are in need of a tire change. They are trying to meet us in Jackson Wyoming and this is a major setback as nothing is open this Labor Day weekend. Any thoughts or suggestions would greatly be appreciated
Thank you
Looked up the Walmart in Cookeville, TN. They have 2 tires that list as in stock, a 205/60R15 and a 215/60R15, both by Douglas. Not a preferred tire by any means, but it beats walking. Now he needs a shop that can get the tire on.
Or maybe wait until Tuesday?
TOMMY'S MOTORSPORTS (Gold Rated Can Am dealer)
550 CRABTREE RD, CROSSVILLE, TN, 38571-0291, US
29.5 miles from Cookeville
931-456-0900
h0gr1der
2018 RT Limited Blue/Chrome SE6 *Tri-Axis Bars*Adjustable Driver Backrest*175/55R15 Vredestein Front, 205/60R15 Vredestein Rear Tires*Baja Ron Front Spring Pre-Load Adjusters*Misty Mountain Sheepskin seat cover*Centramatic balancers *Garmin Zumo 595LM GPS*KOTT Grills*BajaRon swaybar*SpyderPops Alignment*Missing Belt guard*Magnetic Mirrors*Custom Rear Adjustable Shock*360° LED Headlights & Foglights*Progressive front fender turn signals
States Visited on Less than 4 wheels.
-
Very Active Member
If he can get the rear wheel off then maybe Walmart would mount it for him. Or put out a call on NABR on Facebook and maybe someone in the area can help him. (North American Biker Rescue)
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
How do we contact them there in Tennessee? I will put a shout out on NABR need to be able to tell someone how to get hold of them.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Try an ISO for an individual with a tire changing machine on nextdoor.com.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Thanks to everyone who has replied. They found a tire but unfortunately can’t find any help putting the tire on. I will pass the information given on to them and keep you updated. BTW, the rear tire was the original with only 2,000 miles on it. I recommended a car tire which they bought
-
Ozzie Ozzie Ozzie
Hey CKW, if they can either take the rear wheel off the Spyder themselves, maybe find an open tire outlet nearby to do that, or possibly contact a nearby Spyder owner who can help?? Once the rim is off the Spyder, just about any tire fitting outlet should be able to fit the new tire onto the rim! Or maybe that handy nearby Spyder Owner might have the basic gear & skills necessary to do it for them, or know someone who does?! After all, the wheels on our Spyders really ARE just car tires on car rims, the only difference is that they've got a little different hub arrangement on the rear or smaller holes in the middle of the fronts, neither of which will be any issue for removing/refitting a tire, altho those might be a bit of an impediment for anything more than basic balancing. Still, most well known brand name tires won't usually need much in the way of balancing, usually it's just a matter of aligning the red or yellow dots as appropriate when the tire is fitted!
So I guess we can put it out there, surely there's a Spyder Ryder out there somewhere nearby who can help, even if it's just with locating a tire fitter who's open, or someone who can remove & refit a tire?!
C'mon fellow Spyder Lovers, can't someone help??
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
Go NABR on facebook and put out what they need. There has got to be someone in that are of Tennessee with a tire machine or al least a set of tire levers and a compressor.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Originally Posted by pegasus1300
Go NABR on facebook and put out what they need. There has got to be someone in that are of Tennessee with a tire machine or al least a set of tire levers and a compressor.
Yeah, but I think the big problem is going to be getting the wheel off while on the road, Paul......and if it is not done in a CanAm shop, alignment and belt tension on refit could be a struggle.
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
What about Spyders to the Rescue from the home page? Several members within a hundred miles or so.
h0gr1der
2018 RT Limited Blue/Chrome SE6 *Tri-Axis Bars*Adjustable Driver Backrest*175/55R15 Vredestein Front, 205/60R15 Vredestein Rear Tires*Baja Ron Front Spring Pre-Load Adjusters*Misty Mountain Sheepskin seat cover*Centramatic balancers *Garmin Zumo 595LM GPS*KOTT Grills*BajaRon swaybar*SpyderPops Alignment*Missing Belt guard*Magnetic Mirrors*Custom Rear Adjustable Shock*360° LED Headlights & Foglights*Progressive front fender turn signals
States Visited on Less than 4 wheels.
-
Very Active Member
Originally Posted by Peteoz
Yeah, but I think the big problem is going to be getting the wheel off while on the road, Paul......and if it is not done in a CanAm shop, alignment and belt tension on refit could be a struggle.
Pete
actually not a problem. Wheel can be removed without disturbing either tension or alignment. See you tube video by finless bob.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Originally Posted by pegasus1300
actually not a problem. Wheel can be removed without disturbing either tension or alignment. See you tube video by finless bob.
Yeah, the tension and alignment can indeed be done without disturbance for those who know, Paul, but this couple are on the road and unlikely to find an experienced Spyder rider or shop who knows all that. Another concern is the 168 ft/lbs required to release and refit the axle bolt on the post 2013 models. That is the overall struggle to which I was referring. Fingers crossed they have found a solution by now.
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round, with sag adjusted for extra 3/8” clearance up front
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
CKW19 so what's the latest? Any progress?
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
So they got in the dealership first thing yesterday morning and the tire was changed by 4:30pm, they are now on their way. Hopefully we will meet up with them Wednesday/Thursday in chamberlain SD and continue on to Wyoming and Montana.
-
Very Active Member
so glad they got it resolved. Happy TRAils
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|