-
Very Active Member
-
Very Active Member
-
Thanks .....
Well done... there is an enabled spyderlovers forum where many such mods appear. Not making them for sale is the norm but having the pictures and spec's help those that are looking for such solutions. congrats on getting your ryde set up for you.... enjoy
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
Originally Posted by Chupaca
Well done... there is an enabled spyderlovers forum where many such mods appear. Not making them for sale is the norm but having the pictures and spec's help those that are looking for such solutions. congrats on getting your ryde set up for you.... enjoy
Yep, that is the forum I posted it on.
-
I don't need these mods but I thank you for the info and the clear photos, I'm sure this will be useful to others on this forum!
Thanks!
-
a job well done. Dale
-
Very Active Member
If there's a will there's a way!!! Rock on my friend!! Good job!
-
Active Member
Gwolf, nice job. I too am an AKA left leg but am fortunate enough to be able to wear the prosthesis. I Ryde a RT Ltd. and will file this away for the future if necessary.. Ryde safely my friend...
-
Very Active Member
No logo knee grip pads.......... made for Honda CB500, but good fit on F3 Spyder. Protect the sides of tank from scuffs and get better grip with your knees. Around $15.......... Amazon, Ebay, just use google. Come with zero instructions. Not difficult to figure out. Clean area well with grease and tar remover. Clean any residue off with iso - alcohol. Let dry. Peel the side of the 3M sticky pad that goes against the rubber first and apply to the rubber pad. Cut off any overlap with utility knife before sticking to the tank. Next peel the cover from the tank side of the 3M adhesive and stick it on the side of the tank. Careful about alignment......... not going to get a second shot at it.
May or may not need these if you have two feet on the foot pegs, but when one or both legs are missing they will help grip the slick sides of the tank for some aggressive riding.
-
Great stuff, Gwolf...thanks for sharing! Ryde on...ryde safe!
-
Active Member
Originally Posted by Gwolf
No logo knee grip pads.......... made for Honda CB500, but good fit on F3 Spyder. Protect the sides of tank from scuffs and get better grip with your knees. Around $15.......... Amazon, Ebay, just use google. Come with zero instructions. Not difficult to figure out. Clean area well with grease and tar remover. Clean any residue off with iso - alcohol. Let dry. Peel the side of the 3M sticky pad that goes against the rubber first and apply to the rubber pad. Cut off any overlap with utility knife before sticking to the tank. Next peel the cover from the tank side of the 3M adhesive and stick it on the side of the tank. Careful about alignment......... not going to get a second shot at it.
May or may not need these if you have two feet on the foot pegs, but when one or both legs are missing they will help grip the slick sides of the tank for some aggressive riding.
And they look good too.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|