-
Active Member
3 Bag Ryker & Passenger Spot
Just finished my bags. Still have to remove everything and have it powered coated. Will do a test run 1st. Make sure my wields are good . Givi Trekker Outback top case is 42L side cases are 37L. These bags are set high for clearance. I will not carry a passenger so no seat will be added. Cargo room only.Ryker 1.jpgRyker 2.jpg
-
Super! That gives your Ryker a utilitarian look. I like. cueman
-
nice... cant wait to see it all finished.
-
That's what we call around here 10 pounds of ***** in a 5 pound bag, seems like a lot, but congrats on the fabrication work.
-
Very Active Member
The dog seems impressed. I am too.
-
Outstanding! The perfect look for your bike and highly functional. Well done!!! Get ready as many more will want to do what you did.
Rob
Originally Posted by KID Ryker
-
Very Active Member
-
Active Member
Originally Posted by KID Ryker
Just finished my bags. Still have to remove everything and have it powered coated. Will do a test run 1st. Make sure my wields are good . Givi Trekker Outback top case is 42L side cases are 37L. These bags are set high for clearance. I will not carry a passenger so no seat will be added. Cargo room only. Ryker 1.jpgRyker 2.jpg
Does the left side bag float with the swing arm?
-
Active Member
Ryker 4.jpg
Originally Posted by bcraig
does the left side bag float with the swing arm?
no
Ryker 6.jpgRyker 2.jpgRyker 3.jpg
-
Nicely Done....
That is a lot of storage so you can travel a long way or do a lot of shopping....Great job on designing and fabrication you may be getting requests for plans or the built item...
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
That's awesome. Almost like a low-rider/cruiser RT (more so than the F3T or Limited. That machine looks ready for the zombie apocalypse.
-
Nice !!
-
Looks great. A word of caution however, looks like one could end up with too much weight cantilevered on the back, don't know where the weak point is.
A nice job on the rack assembly.
Dean O
Gran Pa Hoon
Founder San Jose BMW
Builder of the Motorcyclist Cafe Barn and Bunkhouse
Alamogordo, NM
'20 Spyder F3 L
-
Looks awesome, good job. Mad Max gets jealous.
-
Active Member
Now you are ready to put Dust-to-Dawson (D2D) on your bucket list.
-
Active Member
I just decided to go old school. Just as effective today as it was 50 years ago.
Ryker with back box.jpg
Spyder F3-S Special Series my traveling ride
Ryker Rally modified for dual sport duty
Honda Grom heavily modified for dual sport duty
Ducati Scrambler Icon Dark my other traveling ride
-
Very Active Member
Originally Posted by poli
That is AWESOME! Will it do a milk run? And its not just a good idea for the Ryker.
IMG_1088.jpg
-
Very Active Member
Originally Posted by robhowen
Outstanding! The perfect look for your bike and highly functional. Well done!!! Get ready as many more will want to do what you did.
Rob
Get ready as many more will want you to do the same for them.
Good job, I like it.
2008 GS SM5, Full Moon Silver
2007 Piaggio MP3 - 250cc
-
Originally Posted by KID Ryker
Patent the plans and put up for sale, or make the units to sell
Awesome job, great work
Would definitely buy plans to add to my 900 Ryker
-
Active Member
Originally Posted by greckman
Patent the plans and put up for sale, or make the units to sell
Awesome job, great work
Would definitely buy plans to add to my 900 Ryker
Will tell you what I used and how I did it. FREE
-
Very Active Member
Very impressive, Thanks for sharing, I'm sure that it will give many more folks ideas on how to fit for theirs Rykers.
-
That looks BADA@@, KID...nice job!
-
Originally Posted by KID Ryker
Will tell you what I used and how I did it. FREE
That would be awesome, keep us posted about instructions
-
Very Active Member
Originally Posted by KID Ryker
Exactly what pieces did you fabricate? Did you use the Max Mount, or just the holes the Max is mounted to? This looks exactly what I was thinking I would want to do if I get a Ryker and ride the Idaho Backcountry Discovery Route.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
There are some very creative people on this forum and thank you all for your ideas! cueman
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|