-
Active Member
Originally Posted by Lamonster
The stock peg is longer than most. We can add pegs to our adapter but it won't be any longer than stock.
Not looking for longer. Looking for wider(front to back) with perhaps rubber grips.
-
SpyderLovers Founder
Originally Posted by Michaelscs
Not looking for longer. Looking for wider(front to back) with perhaps rubber grips.
That we will be able to do. Stay tuned.
-
Very Active Member
Originally Posted by Michaelscs
Not looking for longer. Looking for wider(front to back) with perhaps rubber grips.
Maybe something like a small ping pong paddle shape? Something that would allow it to tilt up and clear the brake lever while being adjusted.
-
Active Member
Looking forward to getting these. The picture looks like the brake pedal is pretty close to the board. Does it clear the board when the brake is applied?
-
Active Member
Ryker Floorboards
Lamont:I like these floorboards. When will they be available?
-
Active Member
Originally Posted by Lamonster
We have the mounts done and hope to get some testing in this week. They turned out really nice and fit the look of the bike well.
I'd like to get these, but it looks like they are really close to the brake pedal. Does the brake pedal clear them when pressed down?
-
Ozzie Ozzie Ozzie
Originally Posted by Ryker900
Looking forward to getting these. The picture looks like the brake pedal is pretty close to the board. Does it clear the board when the brake is applied?
Originally Posted by Ryker900
Lamont:I like these floorboards. When will they be available?
Originally Posted by Ryker900
I'd like to get these, but it looks like they are really close to the brake pedal. Does the brake pedal clear them when pressed down?
You might want to give him a while on that one, Ryker900 - he does have other stuff on his plate & I suspect he's not on the boards at the moment. So hang tight, he'll get them out as soon as he can!
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Active Member
Originally Posted by Peter Aawen
You might want to give him a while on that one, Ryker900 - he does have other stuff on his plate & I suspect he's not on the boards at the moment. So hang tight, he'll get them out as soon as he can!
No problem. I can wait. It's still too cold here for me to ride anyway. I can't afford heated riding gear.
-
SpyderLovers Founder
The floorboard adapters should be heading to the anodizer this week. I hope to have product in the store next week. As far as the break goes it is adjustable.
Took a little spin on it this weekend. https://www.facebook.com/LadyLamonst...3391890218152/
-
Active Member
Originally Posted by Lamonster
I see you have a backrest on it in the video, will that be available too? How about a top case with a backrest? I'm 75 years old and bought a Ryker 900 ACE. Haven't been able to ride it much since it's so cold here in Columbus,Ohio. Can't afford the heated gear.
-
SpyderLovers Founder
Originally Posted by Ryker900
I see you have a backrest on it in the video, will that be available too? How about a top case with a backrest? I'm 75 years old and bought a Ryker 900 ACE. Haven't been able to ride it much since it's so cold here in Columbus,Ohio. Can't afford the heated gear.
Yes we will have a backrest and it will work with a topcase. I'm waiting on one part to finish that.
50549169_2135800416463218_674147623082393600_n.jpg
50992741_2135800456463214_906980742251151360_o.jpg
-
The floorboards look great on and off of the Ryker. Great job, hope your health continues to improve. Dale
-
Active Member
Looks like another great addition by Lamont......keep up the good ideas,my friend .
" My Serenity "......2017 Spyder F3T....Silver Gray in color,Red dragon on Celtic cross on frunk,Blade wheels ,Spyderpops bumpskid,LED headlights and foglights,Lamonster heim joints,Lamonster powerpoint,F3 Spyder cuff, Lidlocks helmet lock,Lamonster air pack,Ron-jon sway bar,Sara Clark painted thin blue line and Sheriffs badge, Spyderpops LED strobe brake and rear turn signal lights, Lamonster gas cap, bluetooth.
-
SpyderLovers Sponsor
Very cool! I think those look great! Keep on imagineering - dream up cool stuff and make it!
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Noticed the LEDs in the hood on the video. Looks good! I would buy a set.
-
Active Member
Backrest
Originally Posted by Lamonster
That looks great, but I don't think it will work with the top case I got from Can Am.The Linq Top Case (It sits right up against your back with no place to fit a backrest, so pretty much it is the backrest with no padding)Real Ryker in driveway Jan. 3.jpg Do you have another top case available? Thanks
-
Active Member
Originally Posted by Ryker900
That looks great, but I don't think it will work with the top case I got from Can Am.The Linq Top Case (It sits right up against your back with no place to fit a backrest, so pretty much it is the backrest with no padding) Real Ryker in driveway Jan. 3.jpg Do you have another top case available? Thanks
I would gladly give up my Linq Top Case for a backrest, it doesn't have much room inside it anyway. I'd like a better top case and one that locks and holds my helmet anyway.Thanks for all your great inventions.
-
Active Member
Originally Posted by Lamonster
Do you think this top case would fit behind the backrest: https://www.revzilla.com/motorcycle/shad-sh29-top-case
-
SpyderLovers Founder
-
Active Member
Originally Posted by Lamonster
Is that a Shad? I'm looking at one that is much cheaper. That one is too expensive for me. If that Shad will work I'm guessing they all should. It has a universal mounting plate right?Shad top case.jpg This is what I'm thinking. It has a backrest pad attached. It's made for a passenger.
-
Very Active Member
Originally Posted by Lamonster
hmmm...you know what would be cool? A storage case that mounts on the back of the Rykers large passenger back rest so it could be used when the back rest is tilted down for single ride usage or when there is also a passenger on it.
The door seam would probably need to be at a 45 degree angle so when its in the single ride mode the angle goes down towards the rider and when tilted up for a passenger the door seam would them be tilting down away from the rider.
-
Active Member
Originally Posted by Lamonster
Are these the floorboards that you are going to put on the Ryker: http://www.lamonstergarage.com/can-a...cle-lamonster/ Just wondering so I can save for the price of them.Thanks
-
How is the top case coming along?
-
Am i blind? where is the link to the floorboards
-
Ozzie Ozzie Ozzie
Last edited by Peter Aawen; 02-27-2019 at 11:07 PM.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|