NEW PRODUCT FROM F4 CUSTOMS INC. FOR THE F3 TOURING AND LIMITED

[F4 Customs]

We have developed a set of air wings for the F3 Touring and Limited and fit onto the F4 Customs windshields.
Give us a call if you are interested. They work great!
F4 Customs
330-968-4644

[JP58]

Just ordered mine today. Will be ready to go when spring comes.

[Reacher68]

I wonder how much difference that would make for my hands when riding in cold weather. I have liners and base layers and have tried different gloves, but my fingers are always freezing on a cold weather ride. Would this make a difference for me?

[Peteoz]

I wonder how much difference that would make for my hands when riding in cold weather. I have liners and base layers and have tried different gloves, but my fingers are always freezing on a cold weather ride. Would this make a difference for me?

Reacher, I hate giving opinions on issues like this as we are all different and have different thresholds, and live in different climates....... but..... I have both the F4 and Madstad screens. I found that the F4 was a bit cooler during winter due to the bottom cutouts, and the Madstad a lot hotter in summer, as it DOESN’T have the bottom cutouts. Thus....F4 in summer and Madstad in winter. The F4 is my preferred screen, and while I haven”t yet bought the F4 wings, I will be buying them shortly as I believe this will allow me to leave the F4 on, all year round.

Pete

[JP58]

I wonder how much difference that would make for my hands when riding in cold weather. I have liners and base layers and have tried different gloves, but my fingers are always freezing on a cold weather ride. Would this make a difference for me?

I haven't install mine yet because bike was already in storage. My hands were cold this fall so I made some solid mount wings for mine. Not as good looking as F4 customs are. But kept the wind off my hands. So I believe these will be even better. Go for it.

[Rattlebars]

I wonder how much difference that would make for my hands when riding in cold weather. I have liners and base layers and have tried different gloves, but my fingers are always freezing on a cold weather ride. Would this make a difference for me?

You can make some heated grips cheep!

>CLICK ME<

[JP58]

You can make some heated grips cheep!

>CLICK ME<

Heated grips suck on the F3L.

[F4 Customs]

The air wings do a great job in taking the air off of your hands. I ride a F3 also and love the change it has made.
Don

[wrb3004]

I have the F4 Customs windshield on both my RT and F3 and am very happy with them. I have the baker built air wings on my F3 and like the idea of having the upper air wings also. May order a set and put them on this winter. I have always been curious to why the windshield was designed to follow the bracket instead of coming straight down. This would give a little better hand protection to start with.

[Peteoz]

I have the F4 Customs windshield on both my RT and F3 and am very happy with them. I have the baker built air wings on my F3 and like the idea of having the upper air wings also. May order a set and put them on this winter. I have always been curious to why the windshield was designed to follow the bracket instead of coming straight down. This would give a little better hand protection to start with.

The F4 cutouts give you more airflow in summer, wrb.......it’s a “dammed if you don’t, dammed if you do” scenario. I find my Madstad (without the cutouts), a bit stifling in summer. The new F4 wings now give you the best of both worlds.......clever idea.

Pete

[Chefex]

I just received mine also, but have to wait until spring to try them out.

[F4 Customs]

The F4 cutouts give you more airflow in summer, wrb.......it’s a “dammed if you don’t, dammed if you do” scenario. I find my Madstad (without the cutouts), a bit stifling in summer. The new F4 wings now give you the best of both worlds.......clever idea.

Pete

You are exactly right. I personally ride a F3 Limited and it is nice to open them up in warm weather and get more air flow but on cooler rides shut them off and get the additional protection.

[Cruzr Joe]

Ordered them yesterday revue coming next week

Cruzr Joe

[JP58]

Looking forward to that review.

[Bluehole]

Got mine this past Saturday. Called Don Monday to get a couple things squared away on the stacking of washers and the position of the upper bracket. Once I had that information it was GO time. Tuesday around 11 am I gathered all necessary tools and started work. Couple hours later they were on the bike and adjusted to my liking. I kept the big center rubber washer out which made the top of the wing closer to the bottom of the windshield. Don't know if I will leave it like that or not. Hoping for a serious test run this coming Monday. Weather will be in the 30's---should be a good test!!

[JP58]

I'm a bit confused. Mine came assembled. Can't install till spring. No washers or nuts, bolts came with them. Looks like you just remove existing nuts and install wings and replace nuts. Am I missing parts.

[Bluehole]

I'm a bit confused. Mine came assembled. Can't install till spring. No washers or nuts, bolts came with them. Looks like you just remove existing nuts and install wings and replace nuts. Am I missing parts.

NO, I had some issues that Don was kind enough to straighten me out on and I decided to remove the big center rubber washer to get the wings closer to the bottom of the windshield. Test next week will tell me if I want to keep the washers out or put them back in. Either way, it is mostly a personal preference thing. I had to drill my holes because I purchased my F4 shield before these wings were born.

[AY4B]

Having just switched to the Lamonster Billy Club Bars, My hands are now halfway up my 23" shield, just outside the outer edge. How will these air wings affect my
ryde?

[JP58]

Having just switched to the Lamonster Billy Club Bars, My hands are now halfway up my 23" shield, just outside the outer edge. How will these air wings affect my
ryde?

If you have a brp windshield you can't use these. You must have an F4 customs windshield. The wings bolt to the windshield upper bracket.

[Peteoz]

Having just switched to the Lamonster Billy Club Bars, My hands are now halfway up my 23" shield, just outside the outer edge. How will these air wings affect my ryde?

I’m about to order a pair, AY, and I’ll let you know how they work with my Billy Clubs when they arrive.......but, as JP says, you need an F4 screen to connect them to, and your signature says you have a BRP Touring screen.

Pete

[AY4B]

I just installed a vented 23" F4 windshield on my F3L last weekend. My wifes F3L we just bought her already had a 21" vented F4 installed on it. I just ordered a set of wings for her for Christmas. I may also get me a set later on. Ill have time to see how they do on hers and if that is something I want. With the Billy Club Bars, they will not affect the wind on my hands because my hands are higher up on the shield. I did ride right after I installed it last weekend and there was a misty rain. even though my hands were outside the shields edge, I still felt the shield was keeping them dry. I really liked it!

[Old Ace]

We have developed a set of air wings for the F3 Touring and Limited and fit onto the F4 Customs windshields.
Give us a call if you are interested. They work great!
F4 Customs
330-968-4644

I received mine yesterday and installed them without issue. Takes about 5 minutes. I had a question and emailed Don. He telephoned me about 5 minutes later with the answer to my question. Great looking wings, and better customer service.

If you don't have these on your bike, you should get them ASAP!

[AY4B]

So Far The F4 windshield is the 5th shield I have had on my F3. It is by far the best to date.
1 Stock Painted is nice for the hot summer days .
2 BRP Tall Boy Looks nice but not very good.
3 Cal Scientific Epic fail!
4 Lamonster 19" Nice but too short for me.
5 23" Vented F4 tinted

[Rattlebars]

Customer service from Don is A1! I had a problem with my shield and they will be sending me a complete new shield at no cost and I ordered the wings with them for a good price. I have another testimonial to add to this. I credit the F4 that I had on my GL1800 with saving my life. I had a left turner which was impossible to avoid, I actually hit the right corner of the vehicle meaning she pulled in front of me as I was already there! The F4 did not detach as would a stock shield, but it catapulted me to the right of the impact so that I did not fly forward into traffic. Thanks Don!

Look at the pics. The second one is through the F4 and you can see the trace of my helmet in an arc to the right.

[Peteoz]

I just installed a vented 23" F4 windshield on my F3L last weekend. My wifes F3L we just bought her already had a 21" vented F4 installed on it. I just ordered a set of wings for her for Christmas. I may also get me a set later on. Ill have time to see how they do on hers and if that is something I want. With the Billy Club Bars, they will not affect the wind on my hands because my hands are higher up on the shield. I did ride right after I installed it last weekend and there was a misty rain. even though my hands were outside the shields edge, I still felt the shield was keeping them dry. I really liked it!

Thanks for the feedback, AY. We don’t get extreme winters out here,so I had no issues with the F4 cutouts last winter, but I believe the wings will help in summer in the open position as I can direct the air stream onto my body for a little additional cooling.

Pete