-
2017 Daytona Codes
Getting a limp home mode occasionally after the cruise control assy was replaced by the dealer. The codes I am getting are:
B100F
C0040
Any thoughts?
-
Very Active Member
hey doc ....
I have copied a folder of codes off the lamonster , and there isn`t an B100f in his list , so if this is close too every one translation in codes ( from one manufacture of components , too another , ) I see u0100 which is TCM ( probably not tuner classic movies ) but is Bosch number , and they state " lost communication with ECM ( lost can ID`S ) ---- cause module internal error , damaged circuit wires or damaged module pins .... now take it this is just one so far will keep looking
-
Very Active Member
now this
doc , this was just codes for the ECM module , so it wasn`t a good place too look for codes I suppose , still looking for you
-
VCM
Originally Posted by Roadster Renovations
Getting a limp home mode occasionally after the cruise control assy was replaced by the dealer. The codes I am getting are:
B100F
C0040
Any thoughts?
C0040 is the VCM Module, had to replace mine on my daytona.
-
Very Active Member
thanks doug
haven`t found the B100f , the app isn`t giving any help
-
Very Active Member
bring it back ----
I did a reply only to get this thread too the top again , the B100f is an unusual code I got admit , ( is this the correct code .... ) maybe the B isn`t a B just looking for a clue thanks to folks checking this out for the fellow rider
-
A few pics. With my memory I need it!!
Last edited by Peter Aawen; 05-11-2023 at 09:42 PM.
Reason: Fixed attach display ;-)
-
Very Active Member
C0040 VCM Brake pedal switch failure
COO6C ECM VSS CAN rate message error
B1OOF Can not find any information on that code
2017 F3 Limited in Intense Red Pearl
2008 Triumph Rocket (SOLD)
2002 Honda VTX 1800 C ( SOLD)
2014 Triumph Thunderbird Commander
-
-
Tech at the dealership pinched the harness installing it. Not cool. Going to ask for gas reimbursement.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|