-
Active Member
Helmet Holders
I saw a post a while back on SL where a guy made a helmet holder for his Spyder out of a piece of metal. Nothing to do today so I decided to make my own.
I used a piece of white vinyl porch railing I had laying around, so it won't scratch the paint; a Dremmel tool; utility knife; tin snips; and a heat gun are all that I used.
They work great and I just turn them over and then store in place under the seat.
008.jpg 004.jpg
011.jpg 007.jpg
Last edited by Peter Aawen; 09-06-2023 at 07:44 PM.
Reason: Fixed attach display ;-)
-
Originally Posted by Border Rider
I saw a post awhile back on SL where a guy made a helmet holder for his spyder out of a piece of metal. Nothing to do today so I
decided to make my own. used a piece of white vinyl porch railing I had laying around so it won't scratch the paint. A Dremel tool, utility knife. tin snips and a heat gun is what I used. They work great and I just turn them over and the store in place under the seat.
Innovative solution to a common problem. Nice!
2014 RTL Platinum
-
Active Member
Oh so easy...
For a mere few dollars, one could buy a plastic coated stainless sreel key ring with a barrel nut, run it through the D Ring, and use the hanger under the seat. Storage in the glove box is easy, hooking is easy and fear of theft is non existent! To the design ingenuity in post 1!
-
-
Good job, love to see DIY
-
-
SpyderLovers Sponsor
Love it!
For those not as talented; go to pet smart. Buy a small choke chain. Pass thru D ring, hook on helmet holder. Close seat. Done. 😃
Last edited by Peter Aawen; 09-06-2023 at 07:40 PM.
Reason: Moved Post title... ;-)
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Why not just hook the helmet strap over the hook under the seat?
-
Active Member
It appears that in most cases, or at least mine, that the helmet strap is not long enough to reach the hook and then close the seat. I choose to put my helmets in the frunk and right side saddlebag to prevent any tampering and not have to remove my communications every time to prevent stealing.
-
Active Member
Originally Posted by Cleg
For a mere few dollars, one could buy a plastic coated stainless sreel key ring with a barrel nut, run it through the D Ring, and use the hanger under the seat. Storage in the glove box is easy, hooking is easy and fear of theft is non existent! To the design ingenuity in post 1!
Pictures please.
-
Active Member
Originally Posted by Zip
Why not just hook the helmet strap over the hook under the seat?
Not only is my strap not long enough, but the d-rings aren't big enough to fit over the hook. I invested in the Lidlocks, but if I had thought of it I probably would have done the chock chain thing.
2017 RT Limited
-
Originally Posted by CrashDavis
Not only is my strap not long enough, but the d-rings aren't big enough to fit over the hook. I invested in the Lidlocks, but if I had thought of it I probably would have done the chock chain thing.
That,s too bad , I have a half, 3/4, and modular and they all work. FYI choke chain is soft and easy to cut.
-
Originally Posted by Cleg
For a mere few dollars, one could buy a plastic coated stainless sreel key ring with a barrel nut, run it through the D Ring, and use the hanger under the seat. Storage in the glove box is easy, hooking is easy and fear of theft is non existent! To the design ingenuity in post 1!
How does it lock ???? Probably a stupid question, I am probably missing something !!!
-
Very Active Member
Originally Posted by biker01red
How does it lock ???? Probably a stupid question, I am probably missing something !!!
If you don't know it is not stupid. Just pass one end of the chain thru your helmet "D" rings. Pass the small end of the chain thru the big end. Put the big end over the helmets hooks under the seat. Close the seat and your helmet is locked on.
If I put my chin strap just barely thru the "D" rings it is long enough to slide over the hooks and keeps the helmet snug against the seat also,but I think I am going to look closer at the choke chain solution. Nice piece of work there Border Rider.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Originally Posted by pegasus1300
If you don't know it is not stupid. Just pass one end of the chain thru your helmet "D" rings. Pass the small end of the chain thru the big end. Put the big end over the helmets hooks under the seat. Close the seat and your helmet is locked on.
If I put my chin strap just barely thru the "D" rings it is long enough to slide over the hooks and keeps the helmet snug against the seat also,but I think I am going to look closer at the choke chain solution. Nice piece of work there Border Rider.
Thank you very much !!!!!
-
very nice work, I work in a plastic supply and we do fabrication you gave me ideas for using polycarbonate
-
Originally Posted by Zip
Why not just hook the helmet strap over the hook under the seat?
We have the Nolan N40s, that has the microclick chin straps there is not enough play in them to use the hooks under the seats. I like some of these ideas but am wondering about security (theft) though
Dave
Last edited by Peter Aawen; 09-06-2023 at 07:40 PM.
Reason: Moved post title...
-
SpyderLovers Ambassador
-
Very Active Member
Good idea, well done!!!
-
-
Originally Posted by Border Rider
I saw a post a while back on SL where a guy made a helmet holder for his Spyder out of a piece of metal. Nothing to do today so I decided to make my own.
I used a piece of white vinyl porch railing I had laying around, so it won't scratch the paint; a Dremmel tool; utility knife; tin snips; and a heat gun are all that I used.
They work great and I just turn them over and then store in place under the seat.
008.jpg 004.jpg
011.jpg 007.jpg
Hi, here's what you're looking for:
CLIP CASQUE (8).jpg CLIP CASQUE (1).jpg
CLIP CASQUE (9).jpg CLIP CASQUE (8).jpg
CLIP CASQUE (1).jpg CLIP CASQUE (9).jpg
Last edited by Peter Aawen; 09-06-2023 at 07:38 PM.
Reason: Fixed quote display & removed multitudes of extraneous CMD lines?! :-/ ;-)
-
Uhh...I see no helmet hook tabs under the seat on the ST-S...
-
Hey you wouldn't have a pattern would you? I could print it out and make my own..Carpenter with a lot of tools..
-
Active Member
I have modular helmets. I bought 2 - 18" long pieces of small cable and the ferrules and put loops in the ends. We hang our helmets on the mirrors so I just loop a cable thru the chin bar and thru the slot in the mirror and put a small travel lock on it..
-
Originally Posted by amusher
I have modular helmets. I bought 2 - 18" long pieces of small cable and the ferrules and put loops in the ends. We hang our helmets on the mirrors so I just loop a cable thru the chin bar and thru the slot in the mirror and put a small travel lock on it..
Yep Have that just wanted to tinker..
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|