-
knight Rider Light
-
Sorry, this content isn't available right now
The link you followed may have expired, or the page may only be visible to an audience you're not in.
-
Very Active Member
Here is one that can be had on ebay.
Amazon has some good stuff too.
Last edited by SteveLaoyster; 06-13-2017 at 03:24 PM.
AKA Jud Smales, Four Year Spyder Ryder!
"Quando Omni Flunkus, Moritati"
The Critter 2016 RT-S
Cat Bypass from Lamonster
BajaRon Sway Bar
Hella dual horns with relay
BRP Hitch with trailer module
Foam Grips
Adjustable Air Deflectors
Driver & Passenger Gel Pads in Seat
Shorty antenna
Ultraguard half cover
Gremlin bell from my son
Break Stripe Kit from Wrap My Spyder
-
the link goes to facebook
-
Originally Posted by samewok
the link goes to facebook
But that link is dead
-
It works for me maybe you have something turned off.
-
Very Active Member
link doesn't work for me either.
I also wanted a "Larson scanner" as they are officially called (after Glen A Larson who used them on not only Night rider, but also Battlestar Galactica (Cylons). The problem I found with the ones offered on Ebay, Amazon etc was that there was a multitude of colors and patterns that the scanner randomly went through. I wanted the "night rider" scanner and in blue ONLY.
So, after much searching, the only way I made it happen was making it myself with an Arduino. A 5v regulator and the Arduino are in the space to the upper right of the Frunk, and the LED's are across the front of the bike under the headlights (RT-S model) I have a movie of it, but it is at home, and I am at work right now.
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
the new one TricLed has 7 different colors.
-
Very Active Member
Sorry for the poor quality of the photos and the vid. They were taken by a friend.
I have the scanner switched by a 5th switch I added to my dash.
mms_img1754248724.jpg mms_img-1497113079.jpg
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
And as with anything "light"related and especially on the front, you had better check with your local & state authorities regarding what is legal. I know that won't fly in any way shape or form here in Cali....
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
-
Very Active Member
Originally Posted by hypurone
And as with anything "light"related and especially on the front, you had better check with your local & state authorities regarding what is legal. I know that won't fly in any way shape or form here in Cali....
That's why the switch.
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
that is why it has a remote to turn it on or off also to change colors
-
TricLED night rider
Originally Posted by bcer960
link doesn't work for me either.
I also wanted a "Larson scanner" as they are officially called (after Glen A Larson who used them on not only Night rider, but also Battlestar Galactica (Cylons). The problem I found with the ones offered on Ebay, Amazon etc was that there was a multitude of colors and patterns that the scanner randomly went through. I wanted the "night rider" scanner and in blue ONLY.
So, after much searching, the only way I made it happen was making it myself with an Arduino. A 5v regulator and the Arduino are in the space to the upper right of the Frunk, and the LED's are across the front of the bike under the headlights (RT-S model) I have a movie of it, but it is at home, and I am at work right now.
Ray
Hi Ray, tricled has a custom knight rider LED with 7 different color and blue is one of them.
White color is included, so you can run it solid as driving light.
the pattern is not random, we only make to scan only and solid color.
It comes with RF remote to select color and between 2 pattern, on/off and adjusting speed.
Here is the link (or copy-paste into your browser) for the night rider.
For RT Spyder, it will need a "bumspkid" as the bar sits on it.
https://www.tricledusa.com/_p/prd1/4...ar-with-remote
-
Very Active Member
Originally Posted by Cindy-TricLED
Hi Ray, tricled has a custom knight rider LED with 7 different color and blue is one of them.
White color is included, so you can run it solid as driving light.
the pattern is not random, we only make to scan only and solid color.
It comes with RF remote to select color and between 2 pattern, on/off and adjusting speed.
Here is the link (or copy-paste into your browser) for the night rider.
For RT Spyder, it will need a "bumspkid" as the bar sits on it.
https://www.tricledusa.com/_p/prd1/4...ar-with-remote
Hi Cindy, and thanks for the link.
Unfortunately the web site does not show it on a RT. And as a person preference, I did not want it low on the bike. When I first saw the Spyder, I said to myself, "this needs a night rider scanner", but up under the lights.
Does your scanner remember the settings when it is turned off? I.e. I have it on a scanning speed, and blue lights. I turn the bike off and when I turn it back on, the same settings are running?? Or do you have to use the remote to get it back?
I just wanted a scanner that turned on, and scanned back and forth (with the correct trail of lights) when I wanted it too, not something that took a bunch of work to get to do what I want. This was the problem with the Ebay lights.
I know I'm being picky, but that why I built my own.
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Originally Posted by bcer960
Hi Cindy, and thanks for the link.
Unfortunately the web site does not show it on a RT. And as a person preference, I did not want it low on the bike. When I first saw the Spyder, I said to myself, "this needs a night rider scanner", but up under the lights.
Does your scanner remember the settings when it is turned off? I.e. I have it on a scanning speed, and blue lights. I turn the bike off and when I turn it back on, the same settings are running?? Or do you have to use the remote to get it back?
I just wanted a scanner that turned on, and scanned back and forth (with the correct trail of lights) when I wanted it too, not something that took a bunch of work to get to do what I want. This was the problem with the Ebay lights.
I know I'm being picky, but that why I built my own.
Ray
I understand, nothing wrong of being picky, we want our ride to look a certain way.
For the RT, we put the bar low on top of bumspkid because the LED bar/strip is long.
and so far this is the best placement for our night rider.
RT doesn't have the flat space on the nose like F series does.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|