-
-
Very Active Member
Can't agree Eric - but you prefer it and that's all that counts.
The best substitute for brains & knowledge is....................silence.
-
-
Last edited by EricDeub; 11-21-2010 at 07:05 PM.
-
WOW!! I love it!! Do you ever have a passenger? I am guessing yes since you have a backrest.
Any problems with it rubbing the tire?
-
No problems one time me and my wife did the Dukes of hazard over a hill down in hocking hills. We hit as hard as it will ever hit and there was no rubbing so it passed all test.
Originally Posted by SpyderGirl
WOW!! I love it!! Do you ever have a passenger? I am guessing yes since you have a backrest.
Any problems with it rubbing the tire?
-
Hi Eric.
Fantastic looking paint job.
Did you paint or powder coat the sport rack and back rest?
I'm looking at repainting my grey back rest and rack to suit my white 2010 RSS. I'm not sure if I should repaint them in black or white though (black would contrast and continue the flow of the seat and dash)
Thanks for any advice if able.
Ken
Last edited by Baytown; 11-22-2010 at 06:36 AM.
-
They are painted. I think white will look the best with silver racing stripes.
Originally Posted by Baytown
Hi Eric.
Fantastic looking paint job.
Did you paint or powder coat the sport rack and back rest?
I'm looking at repainting my grey back rest and rack to suit my white 2010 RSS. I'm not sure if I should repaint them in black or white though (black would contrast and continue the flow of the seat and dash)
Thanks for any advice if able.
Ken
Last edited by EricDeub; 11-22-2010 at 09:24 PM.
-
White with Silver stripes
Thanks mate, I'll find myself a painter then as I was concerned with the powder coat affecting clearances with the assembly anyway, and also want to paint the nose of the machine to match the body panels.
Silver stripes eh??? I'll have a look at that option as I just had a better look at your paint job. That looks really classy, and does the stripe continue down the front of the machine?
Best wishes from Oz.
Ken
Last edited by Baytown; 11-23-2010 at 02:35 AM.
-
The front.
Originally Posted by Baytown
Thanks mate, I'll find myself a painter then as I was concerned with the powder coat affecting clearances with the assembly anyway, and also want to paint the nose of the machine to match the body panels.
Silver stripes eh??? I'll have a look at that option as I just had a better look at your paint job. That looks really classy, and does the stripe continue down the front of the machine?
Best wishes from Oz.
Ken
-
-
I got mine on ebay from this place. http://cgi.ebay.com/ebaymotors/New-0...item35ad45a83b
Originally Posted by Roy's Bassets
Where do I get this fender, stock #, web site, or dealer.
-
Originally Posted by EricDeub
This looks great !!!
-
Very Active Member
-
Pick up a fender and give it a test fit. Zx14 fenders are like $20 on ebay.
-
Active Member
removal
i want to do this so bad, but...
how did you all remove the stock rear fender?
i know how to remove the right side, but the left side where the muffler is - there looks like 2 brake lines or something that are attached to the fender.
how did you get those out?
-
Originally Posted by cenzo989
i want to do this so bad, but...
how did you all remove the stock rear fender?
i know how to remove the right side, but the left side where the muffler is - there looks like 2 brake lines or something that are attached to the fender.
how did you get those out?
I've ran this setup for years. Mine is attached to the swing arm. I've had zero issues in 50,000+ miles of riding.
-
Active Member
Originally Posted by SpyderGirl
I've ran this setup for years. Mine is attached to the swing arm. I've had zero issues in 50,000+ miles of riding.
here are some photos to clarify what im talking about..,
how do i remove those wires from the fender?
-
Originally Posted by cenzo989
here are some photos to clarify what im talking about..,
how do i remove those wires from the fender?
Send me an e-mail, I'd be happy to show you pics of what I did to mine.... spydergirl47@gmail.com
Last edited by SpyderGirl; 03-05-2017 at 04:26 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|