-
Trailer Wiring
I have a 2012 RTL that has the hitch and wiring harness (4 pin). I bought a Cyclemate trailer (4 flat) and would like to change the male end on the trailer. I believe this would be the easiest. Where would I buy the end and is this the best approach?
-
Very Active Member
Originally Posted by beef56
I have a 2012 RTL that has the hitch and wiring harness (4 pin). I bought a Cyclemate trailer (4 flat) and would like to change the male end on the trailer. I believe this would be the easiest. Where would I buy the end and is this the best approach?
.
I assume your trailer plug is a square 4. https://www.amazon.com/Hopkins-11147...pkins+square+4
2018 F3 LIMITED
-
Originally Posted by billybovine
It is a 4 round. I expected to see a 4 square.
-
After looking at the female receptacle it shouldn't be difficult to find a plug. Should have looked closer before I posted.
-
When I had my trailers adapted, I took both to hitch world and they made an adapter for $15. Very easy. If you needed a square four and they don't have one, simply cut in 2x2, fold and tape - WALA - a square four
2015 RT Ltd , Canamspyderaccessories Brake pedal ext. Red
-
Very Active Member
The standard BRP trailer harness is a square 4. So that means it was changed to a round 4 or it's not a BRP harness.
2018 F3 LIMITED
-
I was surprised it wasn't 4 square. I saw it was 4 pins in a square, had read the standard was a square plug but didn't look at the shape of the socket. I hope it doesn't create any problems. Guess I'll find out when I hook it up!
-
Very Active Member
Originally Posted by beef56
I was surprised it wasn't 4 square. I saw it was 4 pins in a square, had read the standard was a square plug but didn't look at the shape of the socket. I hope it doesn't create any problems. Guess I'll find out when I hook it up!
Is this what you need?
http://www.etrailer.com/Wiring/Pollak/PK11402.html
PK11402_250.jpg
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|