-
Active Member
Trailer Wire Adapter
Does anyone know where I may be able to get an adapter to go from my trailer hitch wiring (4 pin flat) on my 14 RTL, to a round plug on a 2010 RT-622 trailer?
2014 Can Am Spyder RT Limited - Pearl White
2010 Can Am Spyder RT - Full Moon
-
I have a trailer that uses a flat plug and my hitch has a square plug. I just went to a auto parts store and bought the parts and made my own converter. Not that hard and its worked great for two years now.
-
Very Active Member
Originally Posted by SteveandBelinda
Does anyone know where I may be able to get an adapter to go from my trailer hitch wiring (4 pin flat) on my 14 RTL, to a round plug on a 2010 RT-622 trailer?
Can Am offers or offered it as an accessory. I recently sold one here that I no longer needed.
If it were me, and you have flat or square, cut the round plug off and wire in a new connector end.
-
Active Member
Originally Posted by ronrico
I have a trailer that uses a flat plug and my hitch has a square plug. I just went to a auto parts store and bought the parts and made my own converter. Not that hard and its worked great for two years now.
I think that this is the way to go. Leaves the wiring on the machine stock and you can always make another cable adaptor if you change trailers.
Norm
...Not All Who Wander Are Lost" - Bilbo Baggins
2015 RT-S SE6 Special Series
-
Active Member
I have the 4 pin flat connector, and the trailer has the round 6-wire BRP plug.
2014 Can Am Spyder RT Limited - Pearl White
2010 Can Am Spyder RT - Full Moon
-
Very Active Member
Originally Posted by SteveandBelinda
Does anyone know where I may be able to get an adapter to go from my trailer hitch wiring (4 pin flat) on my 14 RTL, to a round plug on a 2010 RT-622 trailer?
This is what you need. Part # 710003227, Tongue harness. You may have to search eBay to find it. Maybe a dealer can still get it from BRP. Price is/was $40.00. Adapts 2010-2012 RT-622 to the square 4 wire plug. You say 4 pin flat. If you have a non-BRP hitch you'll have to change the the plug on the bike or on the trailer to make them match.
Actually, your easiest route is to figure out which wires are used for what on the trailer, cut off the round connector, and splice on a 4 flat. Do you have the owner's manual for the trailer. It'll show what pins are used in the round connector.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Cut it off and wire in a 4 pole of your choice.
From the 2011 owners guide.
622 trailer wire 1.JPG622 trailer wire 2.jpg
2018 F3 LIMITED
-
Active Member
Thanks guys for the info. I will print it out for future use. The trailer I was going to buy is sold, and I was not given the decency for getting a call or text yesterday morning, when I was going as far to have a hitch and lighting put on my mini van, just so I could drive almost 600 miles to pick it up. Not very happy.
So if anyone knows of an RT-622 for sale at a non inflated price, please let me know.
Steve
2014 Can Am Spyder RT Limited - Pearl White
2010 Can Am Spyder RT - Full Moon
-
-
Very Active Member
Is the 2012 622 trailer a 4 or 5 wire system? Or they all the same no matter what years?
-
Very Active Member
Other than the 2010, they should all be 4 pin
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Four pin square on both bike and trailer..... Jim
2005 Windveil Blue Premium Mustang Convertible
2008 Honda GL1800/California Sidecar Trike, SOLD
2014 Platinum Silver Satin Spyder RTL, SOLD
Semper Fi
-
Very Active Member
Thanks..I just bought a 2012 622 trailer and it has the round 9 pin on it.. My 2017 RTL has 4 wire square. I'm going to cut off the round. My old aftermarket trailer was 5 wire and I put a converter in . Was hoping I didn't have to do that again.
-
Lamonster has the square 4 to flat 4 pigtail
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|