-
BRP Cover
I installed a Show Chrome luggage rack on my 2014 RTL and the BRP full cover will still fit. It is a bit snug but works. The BRP half cover will not fit.
-
Very Active Member
PM SENT
Originally Posted by dwainjohnson
I installed a Show Chrome luggage rack on my 2014 RTL and the BRP full cover will still fit. It is a bit snug but works. The BRP half cover will not fit.
Message sent
-
Formosa Cover
Originally Posted by dwainjohnson
I installed a Show Chrome luggage rack on my 2014 RTL and the BRP full cover will still fit. It is a bit snug but works. The BRP half cover will not fit.
If you are interested, the Formosa half cover fits my 2015 RT-S with the Show Chrome luggage rack. The cover was $49 including tax and shipping.
Cover3.jpgCover2.jpgCover1.jpg
-
Half Cover
I bought a Nelson Rig Hal cover and it fits. Thanks for the info on the other one.
-
Half Cover - with Show Chrome rack and larger windshield?
Originally Posted by dwainjohnson
I bought a Nelson Rig Hal cover and it fits. Thanks for the info on the other one.
Hi - so regarding the Nelson Riggs half cover - that does fit over the trunk with the Show Chrome luggage rack?
If so, do you think it would also accomodate a larger windshield - like the one from F3 ( 2 inches higher and wider than stock)?
Thanks for any info.
-
In combination with a larger windshield.
Originally Posted by pontow
If you are interested, the Formosa half cover fits my 2015 RT-S with the Show Chrome luggage rack. The cover was $49 including tax and shipping.
Cover3.jpgCover2.jpgCover1.jpg
Looks like a nice cover.
Do you think it would also accommodate a larger windshield - like the one from F3 ( 2 inches higher and wider than stock) in addition to the rack - or is it pretty snug already with the rack?
Thanks for any info.
-
Originally Posted by Denno
Looks like a nice cover.
Do you think it would also accommodate a larger windshield - like the one from F3 ( 2 inches higher and wider than stock) in addition to the rack - or is it pretty snug already with the rack?
Thanks for any info.
I'm not familiar with the windshield you are referring to but I do have an aftermarket shield on my bike. It is the California Scientific (calsci) size Large and the Nelson Rigg full cover and the Formosa Half Cover both fit over it without a problem. It is best on both with the windshield in the full down position. Here are some pics to show you the dimensions of the windshield. BTW, I have been VERY happy with the Calsci windshield.
Dimensions.JPGWindshield.JPG
-
Very Active Member
I use the UltraGard i/2 cover it comes with a nice storage bag
I have a full windshield, luggage rack and bag on the rack and it fits very nice.
Not sure of price but i think it is less than $45.00 shipped to you
Call Spyderpops, he has them 501 627-4008
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Nelson Rigg Half Cover
I have the stock windshield on my 2014 RTL and the Nelson Rigg cover is tight. I do not think it would fit on the wider windshield unless you install it with the windshield in the down position. Nelson Rigg has a support category on their website which I used to verify their cover would fit over that show chrome luggage rack. The response was fast. The Nelson Rigg cover is good quality and I am satisfied.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|