-
Air in damper
I'm confused, my spyder is bouncing like a bucking Bronco. I have an auto air adjustor + a schrader valve. Do I need to fill the air damper using the valve or does the compressor fill it from zero. It seems less bouncy when I started at zero, but I don't feel or see it raise , like I do with the valve.
-
Ozzie Ozzie Ozzie
Have you tried checking the pressure in the air bag via a tire pressure gauge on the valve?? Put too much air in there & it will make the ride bouncy!! Another thing to check is the chart/table in the manual that gives you an 'idea' of what pressure to use vs the weight you have on the bike as well as detailing the upper & lower pressure limits you should keep it between - might be worth checking that out!
-
Originally Posted by Peter Aawen
Have you tried checking the pressure in the air bag via a tire pressure gauge on the valve?? Put too much air in there & it will make the ride bouncy!! Another thing to check is the chart/table in the manual that gives you an 'idea' of what pressure to use vs the weight you have on the bike as well as detailing the upper & lower pressure limits you should keep it between - might be worth checking that out!
Thanks
-
Very Active Member
-
As a point of reference, my RT when the ride switch is set to the middle setting the pressure in the air bag is 48 PSI.
Bob
-
Originally Posted by finless
As a point of reference, my RT when the ride switch is set to the middle setting the pressure in the air bag is 48 PSI.
Bob
I manually put 45psi in it + it bounces especially with wife on back.( 130 lbs. ) maybe I need more air. Didn't check it when I let auto compressor do it ,because I can't see or feel bike raise. I'll try next time. I'm thinking maybe the shock is done for.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|