-
Br windshield or route 129???
I rode to my local dealership today hoping they have the windshields in stock to kind of compare the two and decide finally which way to go...
I am 5'11" 32" inseam and don't mind wind in my face. I have the aggressive handlebars installed and When I had my sts I used to ride with the windshield at its lowest setting and I loved it. It was rare when I set it at its highest setting but at times it served its purpose. Now I am uncertain which way to go.
I definitely don't like the look of the big aftermarket windshields out there. Br windshield and route 129 both are appealing to me. My question is which one should be the closest to the setting I used to have in my Sts as far as height and looks are concerned??? Anybody out there that used to own an Sts and has either one of the shields in question please advise... Thanks
-
I am also 5'-11" with a 32 inch inseam and the BR "focused" all the wind into my face. Also a lot of wind buffeting noise in the ears. I would recommend you try to test drive one and see what you think. Could be an expensive mistake. I have replaced my BR with one from Bikescreens.com which uses the BR mounting brackets.
Rick
-
Originally Posted by stebrock
I am also 5'-11" with a 32 inch inseam and the BR "focused" all the wind into my face. Also a lot of wind buffeting noise in the ears. I would recommend you try to test drive one and see what you think. Could be an expensive mistake. I have replaced my BR with one from Bikescreens.com which uses the BR mounting brackets.
Rick
Your URL should actually be bikescreen.com
BTW, to the OP; if you don't mind a little wind in your face and some "buffeting" at highway speeds - the BR ws will probably be most like what you are used to with the adjustable screen in the lowest position.
Last edited by Trekster; 11-12-2015 at 12:36 PM.
-
-
Originally Posted by stebrock
I am also 5'-11" with a 32 inch inseam and the BR "focused" all the wind into my face. Also a lot of wind buffeting noise in the ears. I would recommend you try to test drive one and see what you think. Could be an expensive mistake. I have replaced my BR with one from Bikescreens.com which uses the BR mounting brackets.
Rick
Thanks !!! The issue i am coming accross is both dealerships i have been to don't have f3 s with windshields to test ride. And that is why i didn't pull the trigger yet because it is definitely not a cheap upgrade .
-
Originally Posted by Trekster
Your URL should actually be bikescreen.com
BTW, to the OP; if you don't mind a little wind in your face and some "buffeting" at highway speeds - the BR ws will probably be most like what you are used to with the adjustable screen in the lowest position.
Thanks!! I think that's what i would most likely go with!!
-
Originally Posted by OJ UK
Well I've had both screens and if like me you accept some wind as a part of motorcycling
then you'll probably be comfortable with either.
Here's a pic of mine with the 129 plus an X-Creen Sport
Here's the BR once again with the X-Creen
Hope this helps...
thanks for the pics. That makes it a lot easier to see them side to side. Looks like it will be the br windshield. How much is the x-creen?
-
I believe I paid around $137 for the larger Xcreen Tour model at Revzilla.
Let me clarify my earlier post. The force of the wind in your face is amplified with the BR installed. With no windshield at all the wind is more "spread out". With the BR the wind is directed/focused straight in your face! If you wear a full face helmet probably no big deal. No helmet law here in SC so...
Rick
-
Active Member
Originally Posted by stebrock
I am also 5'-11" with a 32 inch inseam and the BR "focused" all the wind into my face. Also a lot of wind buffeting noise in the ears. I would recommend you try to test drive one and see what you think. Could be an expensive mistake. I have replaced my BR with one from Bikescreens.com which uses the BR mounting brackets.
Rick
So did I on my 2015 F3. I'm 6'1" and the 20" Bikescreen was my choice. There's night-and-day difference in the wind and noise between the BRP Blue Ridge and the Bikescreen.
jb
-
SpyderLovers Founder
Originally Posted by Samir221
I rode to my local dealership today hoping they have the windshields in stock to kind of compare the two and decide finally which way to go...
I am 5'11" 32" inseam and don't mind wind in my face. I have the aggressive handlebars installed and When I had my sts I used to ride with the windshield at its lowest setting and I loved it. It was rare when I set it at its highest setting but at times it served its purpose. Now I am uncertain which way to go.
I definitely don't like the look of the big aftermarket windshields out there. Br windshield and route 129 both are appealing to me. My question is which one should be the closest to the setting I used to have in my Sts as far as height and looks are concerned??? Anybody out there that used to own an Sts and has either one of the shields in question please advise... Thanks
I'm about the same size as you and I love my 129. My wife has the BR and I don't like the taller shield near as much.
-
Thanks for all ur inputs!!! I did go ahead and order the br windshield. Will be getting it in a week given that it's been shipped from quebec. Next upgrade will be the rims. Will be picking them up next week at the powdercoating shop( 2013 sts rims) Hopefully the color matches perfectly 😬😬. Will be posting pics as soon as i get them. Thanks
-
I have to say that the shields canam sells for the F3 are junk..... Take the money and put it toward an F4
mark
-
I got one of these for my Wing, it's called a "Laminar Lip" it is held in place with industrial Velcro discs. It can be placed in different places to get the sweet spot. In my experience it moves the air up and above the passenger and really makes a difference at speed
http://www.laminarlip.com/caspyder.php
-
Originally Posted by Nyparrothead
I have to say that the shields canam sells for the F3 are junk..... Take the money and put it toward an F4
mark
The resultant value of "any" windshield is highly "subjective" and is directly related to individual expectations of what a particular WS should provide. Hence, a small WS designed to compliment a "sporty" bike will never provide a large envelope of dead air around a driver and passenger. Again, expectations need to generally be in alignment with what a particular WS was designed to provide.
-
I did get the br windshield today and installed it. The install was pretty straight forward and easy. I didn't get a chance to test ride it on the highway yet but I did take it around the neighborhood and I love it. It does redirect some of the air away from the chest area and that was my main concern. I do not mind air on my face so I am a happy camper. No regrets whatsoever !!! Thanks again for all ur inputs and help. Greatly appreciated!!! Now on to the next mod. Still waiting on the phone call to pick up my rims from the powder coating shop. Now looking into a cat bypass.... Anybody knows if the warranty would be voided with the install?
-
-
-
-
I have both and prefer the Route 129. That said I can make you a great deal on a Blue Ridge that is missing two pieces of hardware if you are interested.
-
Originally Posted by TommyBwell
I have both and prefer the Route 129. That said I can make you a great deal on a Blue Ridge that is missing two pieces of hardware if you are interested.
Thanks but I already got and installed the blue ridge ws.
Last edited by Samir221; 11-22-2015 at 10:22 PM.
-
f4 windshield
Originally Posted by Nyparrothead
I have to say that the shields canam sells for the F3 are junk..... Take the money and put it toward an F4
mark
Thanks for this comment!
Don
-
Originally Posted by Samir221
I rode to my local dealership today hoping they have the windshields in stock to kind of compare the two and decide finally which way to go...
I am 5'11" 32" inseam and don't mind wind in my face. I have the aggressive handlebars installed and When I had my sts I used to ride with the windshield at its lowest setting and I loved it. It was rare when I set it at its highest setting but at times it served its purpose. Now I am uncertain which way to go.
I definitely don't like the look of the big aftermarket windshields out there. Br windshield and route 129 both are appealing to me. My question is which one should be the closest to the setting I used to have in my Sts as far as height and looks are concerned??? Anybody out there that used to own an Sts and has either one of the shields in question please advise... Thanks
Talk to F4 CUSTOM WINDSHIELDS. Love mine, have the 28", you would need the 32", great windshield, I got the first production run, drove to Don's house to have it installed. It loves Route 129.
-
New F4 Windshield
Originally Posted by Nyparrothead
I have to say that the shields canam sells for the F3 are junk..... Take the money and put it toward an F4
mark
I'd have to agree. I just got my 32" F4 and am extremely happy with the result.
-
129 Windscreen
Hey, Lamont -
In the pic, it looks like your 129 is smoke tint. Looks cool. BRP doesn't offer smoke. If it is tinted, what's the best way do it?
-
Don't want to tread on Lamont's toes here but he has posted elsewhere that his "tint" is a
professionally applied perforated wrap that was done by a company local to him.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|