|
-
SpyderLovers Founder
-
-
Looks like a pretty cool product. Whenever I get around to getting a hitch on my Spyder I may get one of those.
Pam
-
Hi everybody glad to be on board. I will appreciate all your support.
Last edited by philiptheluggagebuddy; 08-07-2015 at 12:21 PM.
-
Very Active Member
-
Is it a 4 wire plug or 5 for the lights?
Is there predrilled holes for staps?
Can you attach a pic of the rack and dimensions?
-
MOgang Member
Spyder: 2011 RT Limited w/ RT-622 trailer
Mods: ESI Brightsides, RT Rear Brightsides, HMT Brake Light, Scuff Guards, Utopia Backrest, Chrome, and more Chrome, Pearl White Rear View Mirrors, Rear Fender, and Dashboard, Black Rear Wheel and Belt Assy, SpyderPops Heat Shields & Bump Skid, Elka Stage 1+ Shocks, 2012 SF Graphics, Silver Carbonfiber Dash, Corbin Arm Rests, Baker A.W., BRP Vented WindShield. BR's Sway Bar, Tricled White Halo Lights, BadBoy Air Horn, Spyder Legs Floor Boards
-
Had a similar rack when I had my Goldwing GL1500 trike. Covered the license tag and rear turn signals when loaded. Does this rack come with provision for plugging into a BRP harness and hanging the plate on the rear as well as putting turn / brake lights on? The plate on my trike was lower so this may not be an issue but can't be covering up plate or lights.
-
-
More great options are always welcome
-
Very Active Member
 Baloo is my name. Spyders are my game. Well, it's a doo-bah-dee-doo, yes, it's a doo-bah-dee-doo, I mean a doo-bee, doo-bee, doo-bee, doo-bee, doo-bee-dee-doo. And, well, now. Ha ha! What have we here?
2020 Petrol Blue Metallic RTL
-
Welcome, your product looks very interesting. 
-
 Originally Posted by Larry rt
Is it a 4 wire plug or 5 for the lights?
Is there predrilled holes for staps?
Can you attach a pic of the rack and dimensions?
It's a four prong flat plug could not get BRP's 4 prong square plug
Yes, there is a pre-holes for the license plate
The dimension is 24 inches wide and 16 inches deep
You can visit our website at www.theluggagebuddy.com for pictures
Thanks you.
-
Originally Posted by wiredgeorge
Had a similar rack when I had my Goldwing GL1500 trike. Covered the license tag and rear turn signals when loaded. Does this rack come with provision for plugging into a BRP harness and hanging the plate on the rear as well as putting turn / brake lights on? The plate on my trike was lower so this may not be an issue but can't be covering up plate or lights.
Yes, there is a provision for license plate.
Yes it comes with light as an option but it only comes with a four prong flat plug could not get BRP 4 prong square plug.
Please visit our website at www.theluggagebuddy.com to see what I've done to hook up the wiring to the bike.
Thanks.
-
Very Active Member
Welcome to this site!
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
-
Nice looking luggage rack. Definitely provides those of us without trailers another option to carry a little bit more. I like the fact that it is a quick and easy install. I like that it has slits already cut in to allow for drainage should one get caught in the rain. Someone else already asked if the luggage rack had built in anchor points for the security straps to hook on to so I'll wait to see what the answer is for that question. Another question that I have concerning these rack systems that mount to the rear of the Sypder (or any motorcycle) is, "How do you prevent the contents of the luggage and/or coolers from smelling or tasting like exhaust fumes when you pull it out?"
Last edited by 3 Wheel Rider; 08-08-2015 at 09:35 PM.
-
Very Active Member
WEIGHT LIMITATIONS
Since BRP states that the tongue weight is for 40 lbs.MAX.........Does your instructions caution the user to make sure they weigh the rack loaded before they put it on the Spyder ? ? ?..............just a thought towards safety, because I did read that this rack's capacity is for " 80 lbs. "...................Mike 
-
-
Hmmmmm, 80 lb capacity! Isn't the hitch weight capacity 40lb???
2015 RT Ltd , Canamspyderaccessories Brake pedal ext. Red
-
Very Active Member
Welcome. Your Luggage Buddy looks great, just the item I have been looking for. I don't want/need to pull a trailer and this will be great. I may be ordering down the road a bit, have to get a trailer hitch first.
SpyderLady
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
to the PARTY
Mike, This is really scary... 
