New Bike and Trailer were just Delivered, Dealership did all the work, Hooked up trailer and I am not getting any lights, There is a mode you have to set on the function @ the Stero Controls for Trailer Mode. I have done that and for some reason everything on the bike seems to be working correctly but nothing at all on the trailer. The Can-Am plugs are a little different, but I put a test light on this and it appears to be getting power to it. This is very difficult test by yourself, as when I get off of work the shops are closed.


I also Had the dealership install back-off lights- (Wig-Wag) They also work great on the spyder. They make the lights strobe while holding down the brake and continuesly repeat sequence.


Currently I have no lights on trailer at all.

I would like to know if anybody has the Can-Am trailer and has any trouble shooting tips.