Recall sprocket completed.
I have noticed my belt was tracking way out, hard against the outside of the front pulley.
Noise and smelling really hot.

Pulled the Sprocket and its part number is 705503244. My washer is dark and measures 5mm.

The recall notice says it should be kit 219800553. Picture shows a bright shiny washer.

R C 1 126_144506.jpg R C 2 0231126_144432.jpg

This is what I pulled off. Are they correct?

Sprocket 1.jpg Sprockert 2 5.jpg

My reckoning the whole sprocket they fitted needs to move 5mm or so further out.
That will realign with the rear and fix the tracking. Wondering if the correct sprocket was fitted.

Thoughts on this?