I have been researching seats and ran across new Canyon Ball seats
on amazon. My question is, who makes them, are they considered
comfortable and will a factory backrest fit the pilot seat?
Thanks in advance
Dray
I have been researching seats and ran across new Canyon Ball seats
on amazon. My question is, who makes them, are they considered
comfortable and will a factory backrest fit the pilot seat?
Are you talking about the BRP Cannonball seat?
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
Canyon Ball seats sounds like a cheap rip off for BRP Cannonball. I would be careful on this.
Back when I was in retail, we sold real Latigo Leather handbags. Walmart and K-mart came out with genuine Latisglo handbags. They were made out of cheap imitation plastic leather.
The name rip off seems similar here. Caveat Emptor
Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
I have been researching seats and ran across new Canyon Ball seats
on amazon. My question is, who makes them, are they considered
comfortable and will a factory backrest fit the pilot seat?
Thanks in advance
Dray
So your answers are -
1) BRP
2) I have just had mine converted to a Daylong (as opposed to a Draylong), as it was squirm city after 40 minutes......but everyone is different....what suits one won't suit another.
3) The factory backrest will fit the Cannonball seat.
If you can get one to try from your dealer for at least an hour, do that before buying.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
F3S Seats
Reply With Quote
Originally Posted by Dray
x 2. Could not find any specific reference to Canyon Ball seats. Did see Cannonball from BRP though. A misspelling...???
