Turn signal indicator

[Jimboregon]

Just finished it this morning.

Sent from my SAMSUNG-SM-G890A using Tapatalk

[StreetBob]

Jimboregon, that looks like the answer. Can you give us more info please?

[Jimboregon]

Jimboregon, that looks like the answer. Can you give us more info please?

I bought the kit from Auto Zone, it comes with 2 4" LED stripes. Pulled the mirrors off, drilled a small 3/16 hole in the top corner behind mirror, snaked the provided 24" connecter wire through and spliced into the turn signal wires. Really easy and simple! To do the job you'll need; 3/16" drill and drill motor, 4 solder less wire connectors, wire splicing tool, isopropyl alcohol to clean mirror housing, and about 1/2 hour.

Sent from my SAMSUNG-SM-G890A using Tapatalk

[StreetBob]

[QUOTE=Jimboregon;1200238]

Unfortunately there is no room on the F3S to do this mod. I have bought a green pilot light today and will drill out the BRP logo on the dash and wire it into the existing light, pics will follow. 100 degrees tomorrow so it may be a day or two!