Results 1 to 4 of 4
  1. #1
    Registered Users Araņa805's Avatar
    Join Date
    Feb 2013
    Location
    Oxnard, CA
    Posts
    30
    Spyder Garage
    0

    Default Parking break failure!

    I need to tow my 2012 RT LTD to the dealer. As you all know when the parking brake is engaged, the bike can't be moved. I am not sure if I ever saw a thread on how to move the spyder when the battery is dead or the parking brake fails. My battery was recently updated but now I have a parking light issue that won't disengaged.
    Does anyone have any suggestions?

    Your advice is appreciated.

    Thanks

  2. #2
    Registered Users vintage's Avatar
    Join Date
    Aug 2014
    Location
    Cambridge,Ontario
    Posts
    38
    Spyder Garage
    0

    Default

    Check your brake/frunk release switch for proper contact/dirty connections....happened to me
    2011 RTS SE5, Seal floorboards, Bajaron sway bar & links, Nuvi GPS
    2008 GS BRP backrest/sportrack, touring windshield, foglights, trunk liner, (Sold)

  3. #3
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default Sure

    Just disconnect the cable.
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  4. #4
    Active Member shooter's Avatar
    Join Date
    Apr 2013
    Location
    Little Elm Texas
    Posts
    242
    Spyder Garage
    0

    Default Parking break failure!

    Can you hear the brake motor when trying to disengage? If yes remove side right panels to get to the parking brake pulley to see if the cable came off, also check the micro switch under the pulley to see if it's still working.






    Sent from my iPhone using Tapatalk Pro
    Shooter
    __________________
    Steve Chamberlain
    2017 F3 Limited
    Little Elm, Texas
    972-467-8077

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •