Results 1 to 13 of 13

Hybrid View

  1. #1
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default GPS gasket part number?

    The GPS mount is held in place by 4 screws that go through a slotted rubber grommet (groove around the outside). I lost one installing my Kradellock. This is the same style grommet (but different size) that go through windshield.

    I don't even know the name of these grommets and my google searches haven't come up with a similar part (grooved grommet, slotted grommet, grooved washer, etc). Other than use two small grommets - one on the outside of the mount and one on the inside, I haven't figured out to replace this ...thing.

    Has anyone got a vendor/part number? I'm always amazed at how this forum always yields SOMEONE who knows this stuff.
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

  2. #2
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default

    It looks something like this...

    Gasket.jpg
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

  3. #3
    Active Member jegarh's Avatar
    Join Date
    Jul 2016
    Location
    maverick county, texas
    Posts
    67
    Spyder Garage
    0

    Default

    Go to Lowes or Home Depot and look through their selection of screws, bolts, pins, grommets, spacers etc, etc drawers and see if you can find one that matches one of yours.
    intelligence is genetic. Stupidity is an acquired skill.

  4. #4
    Very Active Member spyderCodes's Avatar
    Join Date
    Jan 2016
    Location
    PA
    Posts
    691
    Spyder Garage
    0

    Default

    Image1.JPG

    If you are looking at this part for a 2014 RT Limited then there does not appear to be a gasket or O-Ring there.

    The Power of Logic.
    Start Thinking.

  5. #5
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default

    The diagram you've found doesn't appear to be in the area I'm discussing - I couldn't find an exploded diagram of the GPS mount itself.

    This is the GPS mount which is held by 4 hex-head screws to two u-shaped connectors that swivel front to back.
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

  6. #6
    Very Active Member jcthorne's Avatar
    Join Date
    Sep 2013
    Location
    Houston
    Posts
    5,545
    Spyder Garage
    1

    Default

    Quote Originally Posted by OverHillAndDale View Post
    The diagram you've found doesn't appear to be in the area I'm discussing - I couldn't find an exploded diagram of the GPS mount itself.

    This is the GPS mount which is held by 4 hex-head screws to two u-shaped connectors that swivel front to back.

    Those are garmin parts and come with the garmin zumo motorcycle mount kit. (BRP repackages the Garmin mount with a BRP produced bracket) Garmin does not have a sepreate listing for those grommets but you might call them.

    Blue Flame Spyder F3-S
    2015 F3S , Blue Flame

  7. #7
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default

    In my next career as a motorcycle designer, I will have no black holes where parts can fall in and become completely irretrievable.

    Last week I found a screw in a groove of my driveway. It was one that fell in a hole a year or 2 ago.


    Sent from my iPhone using Tapatalk
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

  8. #8
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default

    Thanks, I'll try them.


    Sent from my iPhone using Tapatalk
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •