-
I'm stuck frunk removal
Thy to remove the frunk from my 2014 RTS. I've got all of the covers off and found the 4 bolts on top and remove all of the torx on the under side. Can't figure out what I'm missing. The only video I found is for a different version
-
Did you get the ones on the underside yet?
-
I have all of the torx out but I can't get it off
-
You might want to PM Mike (BLUEKNIGHT911)
He pull his off about as often as most of us change our shirts...
-
Very Active Member
FRUNK RE-MOVAL
-
I am wondering if the frunk once remove, can it be installed by one person. I want to install LED fog lights and the quick method didn't work
-
Very Active Member
I'm stuck frunk removal
Two on the bottom to the frame, 10 mm hex heads. Four on the top under the headlights also 10mm hex head.
Last edited by Highwayman2013; 08-20-2016 at 10:30 AM.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Two on the bottom look like plastic tabs with bolts thru them by the black frame cross member and the 3- 4 bolts on the top.
Don't forget the lighting connections too will have to be undone.
No torx to remove on underside.
-
Very Active Member
Originally Posted by trikermutha
Two on the bottom look like plastic tabs with bolts thru them by the black frame cross member and the 3- 4 bolts on the top.
Don't forget the lighting connections too will have to be undone.
No torx to remove on underside.
And the AIR sensor on right side ( left if you are facing it ).......Mike
-
Thanks, I gave up for today running out of time and the sun is now on that part of the drive way.
-
Very Active Member
THESE NUTS
Last edited by BLUEKNIGHT911; 08-20-2016 at 10:49 AM.
-
I guess I didn't take enough plastic off. Does the panel around the fog lights and the lower panel with the grills have to come off.
-
must have been the heat. Just read my initial post, I have 2015 not 2014, would that make difference
-
Very Active Member
Also left side Air Intake Hose Clamp....
Originally Posted by ranger1369
must have been the heat. Just read my initial post, I have 2015 not 2014, would that make difference
2015 model RT has the air intake which needs the hose clamp loosened. It is on the left side kind-of below the mirror and you need to loosen a hose clamp so the intake cowling and boot can slip off.
Note how it slips off...I had a little trouble getting the rubber boot back on the pipe and situated.
-
-
Very Active Member
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|