-
Active Member
Brake failure
I R&R my front brakes this week... Bleed all three slaves... Now.. No brakes.
Anyone got an idea???
-
-
Very Active Member
brake failure
Bleed, bleed and keep bleeding till ya have a good pedal. Get you owners/shop manual out and go by the book as to proper sequence. Good luck and keep us posted on your outcome.
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Active Member
Bleeding
Thanks guys... I'll keep bleeding...I've used about a 1/2 qt so far...
howard
-
Very Active Member
Have to agree...
if you did not remove fluid or let air get into the system it should pump back up. Now if you have to bleed the system (remember it's all one system) you will have to check all brakes including the rear. Hopefully you don't have to get into the nanny control box cause then you may have to get hooked up to buds.... keep bleeding hopefully it will come back up....
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|