-
SpyderLovers Sponsor
IS your BUTT SORE ????
I have been making full custom seats on
stock seat pans since 1967 we do it every day
BUT you can improve your stock seat by about
a zillion % by installing one of my custom made
seat Gel kits with memory foam and save many
hundreds of $$$$$$$$ You do it your self.
There are a bunch of Spyder Riders right here
who have done it and love it,
The Gel kit is only $79.95 ... you don't have to
wait 2 or 3 weeks you can do it in about 2 hours.
Call me any time to get yours and save money
and a big plus... you get to say I did it myself!
Ride Safe
Dave
-
Active Member
Originally Posted by Motorcycledave
I have been making full custom seats on
stock seat pans since 1967 we do it every day
BUT you can improve your stock seat by about
a zillion % by installing one of my custom made
seat Gel kits with memory foam and save many
hundreds of $$$$$$$$ You do it your self.
There are a bunch of Spyder Riders right here
who have done it and love it,
The Gel kit is only $79.95 ... you don't have to
wait 2 or 3 weeks you can do it in about 2 hours.
Call me any time to get yours and save money
and a big plus... you get to say I did it myself!
Ride Safe
Dave
Will your gel kit work with a heated comfort seat? I'm sorry if this is already common knowledge.
2015 RT-S
-
Very Active Member
I installed the gel seat and love it.
Easy to install You just need to get the nerve
to tear the seat apart.
Butch
-
Active Member
Seat Upgrade
Are you going to the Spyder Rally in Maggie Valley, NC? October 2016
2015 SE6 SS
Elka Stage 2 front and rear shocks
Lamonster Web Pegs
General Altimax RT43 Rear Tire
Lamonster LED Headlights and Fog lights
Baker Wings
Bajarons Sway Bar & Links
Custom Dynamics Fender, Bright Sides and HMT Brake Lt
Zumo 590
CB
Spyder Mudflap
Lamonster drink holder
Foam Grips
Billet Axle Covers
Stebel Air Horn
SpyderPops Bumpskid
SpyderPops belt guard
SpyderPops Kotte Grills
TriCLED LED Driving lights
Magic Mirrors
-
Very Active Member
-
Very Active Member
Another vote for Dave's gel seat pad. It turned a 2 hour seat into an all day seat for me. I had never done this type of work before but following Dave's instructions I made it thru and the seat looks like stock until you sit on it. Then heaven. You will need a power stapler to pull this off yourself. I bought one for $30 bucks but you may be able to rent or borrow one.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Gel kit with heater
Originally Posted by Motorcycledave
I have been making full custom seats on
stock seat pans since 1967 we do it every day
BUT you can improve your stock seat by about
a zillion % by installing one of my custom made
seat Gel kits with memory foam and save many
hundreds of $$$$$$$$ You do it your self.
There are a bunch of Spyder Riders right here
who have done it and love it,
The Gel kit is only $79.95 ... you don't have to
wait 2 or 3 weeks you can do it in about 2 hours.
Call me any time to get yours and save money
and a big plus... you get to say I did it myself!
Ride Safe
Dave
Dave, I thought I saw your gel kit somewhere where it had a cutout for the tailbone?
That is the part that aches for me after a few hours - and when travelling for days accumulates into a very sore spot.
Will the gel kit help with that?
Also, If I am only doing the gel on the rider section, can I add your Moto heat to the passenger section or will that require a cutout?
Lastly, your website mentions "Some of the newer seats on RT models use hog rings and not Velcro". Is that something that will complicate the process of reinstalling the cover? Will I need any special tool for that?
Many thanks
BTW - I have a 2016 RT Limited (with your BT option)
Last edited by Denno; 07-21-2016 at 02:25 PM.
-
Very Active Member
Having been one of those with hog rings instead of Velcro to hold the back of the cover into the rear to keep that wrinkle free, I can say no it isn't a problem, you just can't pull it free like velcro. You do have to remove the hog rings which any pair of pliers will do. I did not replace the hog rings, I could not get them around the iron rod buried in the seat that they attach to. I had some rebar tie wire and used that, pulling it tight and twisting to keep it that way then used wire cutters to cut off the excess.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
SpyderLovers Sponsor
YES it will work, it is just a little more work
maybe 15 min. time.
Originally Posted by woodyaa
Will your gel kit work with a heated comfort seat? I'm sorry if this is already common knowledge.
2015 RT-S
-
SpyderLovers Sponsor
Not this year
I would love to but that is over 2000 miles away and it hard to pack all that
stuff on a plane.
Originally Posted by ceyer69
Are you going to the Spyder Rally in Maggie Valley, NC? October 2016
-
SpyderLovers Sponsor
Yea I guess that could have other meanings.......
Originally Posted by Fatcycledaddy
-
SpyderLovers Sponsor
You did, I have done several like that, if you have a broken tail bone this is the only help
I know of you will see pictures of it on my website in the photos section.
You can install the heaters on front and back without any cutting of the foam, If installing
Gel and a heater you just put the heater pad on top of the Gel.
Hog rings and the pliers are at Harbor Freight maybe $5.00 you will need a power stapler
Ace Hwd, Sears, Home Depot, Lowe's have elect. and air type also good for putting up
Christmas Lights. Harbor Freight has air type for about $20
Dave
Originally Posted by Denno
Dave, I thought I saw your gel kit somewhere where it had a cutout for the tailbone?
That is the part that aches for me after a few hours - and when travelling for days accumulates into a very sore spot.
Will the gel kit help with that?
Also, If I am only doing the gel on the rider section, can I add your Moto heat to the passenger section or will that require a cutout?
Lastly, your website mentions "Some of the newer seats on RT models use hog rings and not Velcro". Is that something that will complicate the process of reinstalling the cover? Will I need any special tool for that?
Many thanks
BTW - I have a 2016 RT Limited (with your BT option)
-
SpyderLovers Sponsor
Hey That's a great idea, and saves on buying a hog ring set at the store,
good old Ford repair parts Bailing wire.
Originally Posted by pegasus1300
Having been one of those with hog rings instead of Velcro to hold the back of the cover into the rear to keep that wrinkle free, I can say no it isn't a problem, you just can't pull it free like velcro. You do have to remove the hog rings which any pair of pliers will do. I did not replace the hog rings, I could not get them around the iron rod buried in the seat that they attach to. I had some rebar tie wire and used that, pulling it tight and twisting to keep it that way then used wire cutters to cut off the excess.
-
Active Member
Originally Posted by Motorcycledave
YES it will work, it is just a little more work
maybe 15 min. time.
That's great news, thanks for the fast reply. Will the gel insert also work for the passenger part of the seat?
2015 RT-S
-
Very Active Member
Originally Posted by Motorcycledave
Hey That's a great idea, and saves on buying a hog ring set at the store,
good old Ford repair parts Bailing wire.
You should know,it was your idea when I called you about the hog rings
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
SpyderLovers Sponsor
Yes
It will work in both places Zi have them made
large so they will fit 99.9% of motorcycle seats
if it's to large just cut it to size with sizzers
[QUOTE=woodyaa;1159505]That's great news, thanks for the fast reply. Will the gel insert also work for the passenger part of the seat?
2015 RT-S[/QUOT
-
SpyderLovers Sponsor
It was ??????
I must have been on my game that day
Originally Posted by pegasus1300
You should know,it was your idea when I called you about the hog rings
-
Very Active Member
Don't be so modest you are always" on your game"
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|