Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    May 2014
    Location
    Brantford Ontario
    Posts
    6
    Spyder Garage
    0

    Default Fog light bulb change

    Right side is easy, remove cover, remove wires, turn bulb, remove, insert new bulb, hook up wiring, replace cover, done.
    Left side not so easy. Remove mirror, side cover, inspection cover, and loosen the front side cover so that it will slightly slip over the fog light, one screw and 3 plastic studs. Loosen the gear clamp on the intake tube and take the intake tube off of the air cleaner housing. Now you can move the intake tube out far enough to get at the fog light cover easy enough to make the change. Probably best to have another set of hands to hold the intake out, helpful but can be done on your own.

  2. #2
    Very Active Member
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    13,031
    Spyder Garage
    0

    Default

    Which model did you do this on?
    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  3. #3
    Active Member
    Join Date
    Jul 2014
    Location
    St. Charles Mo.
    Posts
    98
    Spyder Garage
    0

    Default

    This is what I went through on my 15 rtss. It took 1.5 hours to figure the left fog light out and 20 minutes to replace right side and the two head lights.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •