-
Active Member
Sugru to the rescue!
I mounted my new Spyderpops cat converter heat shields on my RT a couple of nights ago, and the next day I found the left one flopping around because the clips didn't stay put in the casting holes. The holes are a shade too big.
One clip was gone, so I found another with the same head size, but the diameter of the prong was too small. I grabbed a pouch of Sugru moldable glue and squished it into the prongs on both clips, and formed a wad around them. Then I mashed the filled clips into the holes, clamped them overnight, and tada! Problem fixed.
Sugru will take temperatures up to 385F, so this is a great application for it.
www.sugru.com
Myron Wooley
USMC 1975 - 1979
2nd Spyder: Pearl White 2016 Spyder RT Limited, purchased December 18, 2016 with 1 mile
First Spyder: Pearl White 2012 Spyder RT Limited, gone to a good home
-
I'm a huge fan of Sugru too, glad that it worked for you!
-Fratz
-
Very Active Member
To late??
I could have used that when I made a small scoop for the air inlet on the top of my helmet.
Kaos
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|