12V outlet on F3T

[PrairieSpyder]

One thing I had on my RTS that would be handy on my F3T is a 12V outlet. Later this year, I expect to be camping where electricity won't be available. I used to carry an inverter that I could use to plug in my electric kettle to make coffee.

Has anyone added such a thing to their F3? If so, how'd you do it?

[Tango]

I need to figure this out also. Tom

[spyderCodes]

In the service bay at the rear of your F3T is a 12V switched customer accessory circuit complete with rubber boot.
There is also a knock out plug to fit the 12V socket into.
All you need do is get a 12V socket connector (amazon or brp) and connect the 2 push on connectors.

https://www.amazon.com/TurnRaise-Cha...=12Volt+socket

[Tango]

In the service bay at the rear of your F3T is a 12V switched customer accessory circuit complete with rubber boot.
There is also a knock out plug to fit the 12V socket into.
All you need do is get a 12V socket connector (amazon or brp) and connect the 2 push on connectors.

https://www.amazon.com/TurnRaise-Cha...=12Volt+socket

Is this under the seat somewhere? They used the one in the left panel for the usb. Tom

[spyderCodes]

yes, under the seat.

[jsw469]

http://www.lamonstergarage.com/lamon...3-power-plate/

[PrairieSpyder]

In the service bay at the rear of your F3T is a 12V switched customer accessory circuit complete with rubber boot.
There is also a knock out plug to fit the 12V socket into.
All you need do is get a 12V socket connector (amazon or brp) and connect the 2 push on connectors.

https://www.amazon.com/TurnRaise-Cha...=12Volt+socket

Thanks, Rog.