-
Active Member
TricLed Knightrider light
After watching the demo video on TricLed's Facebook page I decided to order the new Knightrider light with 28 different patterns. I ordered mine in white rather than red or blue (didn't want issue with the Leo's), as I will use this for part of my traffic control duties with our PGR. One thing to note is that the light mounts "On top" of the bumpskid protruding lip, not on it. I have the bumpskid here to be put on and the light here today or tomorrow. Once all mounted I will try to post a short video of it in operation as inquiring minds will want to know. I believe it also has a steady on position to use similar to the bumpskid lights hence getting it in white. This will be used in parades as well and in the 2016 Deadwood lighted trike parade.
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
-
Active Member
Looking forward to seeing it!
Sent from my VS990 using Tapatalk
14 RT-S , Stock Large brake pedal White Pearl
-
Originally Posted by cyclekid58
After watching the demo video on TricLed's Facebook page I decided to order the new Knightrider light with 28 different patterns. I ordered mine in white rather than red or blue (didn't want issue with the Leo's), as I will use this for part of my traffic control duties with our PGR. One thing to note is that the light mounts "On top" of the bumpskid protruding lip, not on it. I have the bumpskid here to be put on and the light here today or tomorrow. Once all mounted I will try to post a short video of it in operation as inquiring minds will want to know. I believe it also has a steady on position to use similar to the bumpskid lights hence getting it in white. This will be used in parades as well and in the 2016 Deadwood lighted trike parade.
Thank you Cyclekid! I hope you like it.
Sent from my iPhone using Tapatalk
-
Very Active Member
Is video going to include install?
-
-
Very Active Member
Originally Posted by Cindy-TricLED
Thank you Cyclekid! I hope you like it.
Sent from my iPhone using Tapatalk
cindy, I hope to meet you one day, you are a big help, and a kind person, I am saving my pennies just to buy some sparkling Farkles from you very soon. I am just having problems figuring out what I need to buy to do what I want.
Joe
U.S. Army Viet Nam Era Vet
2013 Spyder RT-L, Black Currant
Trunk mount dual SS flag holder
TricLed foam hand grips (awesome)
Chromed Soaring Eagle License Holder
Utopia Deluxe driver backrest
LED fender lighting
Fast Flash LED brake light
Spyder Pops LED/skid plate
-
Cindy and the TricLED Team are amazing! Great customer support. I ordered one in Red and installed it on my Victory Vision. Takes a bit of time to cycle through all the options it has - so when you pass the one you wanted, patience is a virtue as you press the button over and over again. ;-) The nice thing is it remembers the last option it was on - so when you shut it off and turn it back on - it goes back.
It does have a solid on option - so you can use it up front as added lights as the OP talked about. I've only found that 3 of the 4 buttons on the remote do anything (unless I'm dense). The top right button turns it on and off. The bottom right button doesn't seem to do anything for me. The other 2 buttons cycle the light option as well as the speed of the option.
Will be nice to see the OP's thoughts and videos when posted.
-
Active Member
Knightrider
Originally Posted by Jdr00ejr
Cindy and the TricLED Team are amazing! Great customer support. I ordered one in Red and installed it on my Victory Vision. Takes a bit of time to cycle through all the options it has - so when you pass the one you wanted, patience is a virtue as you press the button over and over again. ;-) The nice thing is it remembers the last option it was on - so when you shut it off and turn it back on - it goes back.
It does have a solid on option - so you can use it up front as added lights as the OP talked about. I've only found that 3 of the 4 buttons on the remote do anything (unless I'm dense). The top right button turns it on and off. The bottom right button doesn't seem to do anything for me. The other 2 buttons cycle the light option as well as the speed of the option.
Will be nice to see the OP's thoughts and videos when posted.
It arrived in todays mail, did a quick test to make sure all was working correctly since I still have to get the bumpskid on next week. OMG this thing is bright and lots of different patterns including one that will work great for traffic control. Not sure about an install video as my mechanical skills usually lead to saying a lot of bad words! I will do pics of that and video the test run of it in place.
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
-
Wouldn't mind something like that for the spot on the front of the F3 that's normally red. I mean, the Special Series already kinda reminds you of KITT anyway.
Current
2016 Can Am F3T Special Series
2015 Can Am Renegade 1000 X XC
2011 Can Am Outlander 800R X XC
Previous
2012 Can Am RS SE5
-
Active Member
Knightrider in White
Originally Posted by cyclekid58
It arrived in todays mail, did a quick test to make sure all was working correctly since I still have to get the bumpskid on next week. OMG this thing is bright and lots of different patterns including one that will work great for traffic control. Not sure about an install video as my mechanical skills usually lead to saying a lot of bad words! I will do pics of that and video the test run of it in place.
I have a video but cannot figure out how to upload it, I have clicked on the video icon, it wants a url address, Have it on my desktop so tried doing the path which didn't work. Pics have an option to locate them
but video does not, can anybody give me and Idea on what to do?
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
-
If i'm right videos have to come from youtube. thats were i put mine and then it would show here
Kermit
-
Active Member
Knightrider in White
Originally Posted by cyclekid58
I have a video but cannot figure out how to upload it, I have clicked on the video icon, it wants a url address, Have it on my desktop so tried doing the path which didn't work. Pics have an option to locate them
but video does not, can anybody give me and Idea on what to do?
Thanks to CapeSpyder for the tip! The knightrider light was easy to mount right on top of the bumpskid, works well except the remote is a bit finicky not wanting to change between some patterns unless right up against the sensor in the upper right corner of the bar. It is very bright at night and still shows up in bright sunlight. I like being able to use it in steady mode like a bumpskid light. https://youtu.be/qj5WOkKotNE
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
-
Originally Posted by Buckeye Bleau
cindy, I hope to meet you one day, you are a big help, and a kind person, I am saving my pennies just to buy some sparkling Farkles from you very soon. I am just having problems figuring out what I need to buy to do what I want.
Joe
Hi Joe! Hope to meet or talk to you soon!
You can always contact me via email or call the number listed on our site
Sent from my iPhone using Tapatalk
-
TricLed Knightrider light
Originally Posted by RotaxDuramax
Wouldn't mind something like that for the spot on the front of the F3 that's normally red. I mean, the Special Series already kinda reminds you of KITT anyway.
Rotax, you can use the night-rider car for your F3. We have installed this for customer before. See pic below..
Sent from my iPhone using Tapatalk
-
Originally Posted by cyclekid58
Thanks to CapeSpyder for the tip! The knightrider light was easy to mount right on top of the bumpskid, works well except the remote is a bit finicky not wanting to change between some patterns unless right up against the sensor in the upper right corner of the bar. It is very bright at night and still shows up in bright sunlight. I like being able to use it in steady mode like a bumpskid light. https://youtu.be/qj5WOkKotNE
Cyclekid.. If you keep have issue with remote, please contact us via email. We will take care of it.
Sent from my iPhone using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|