Results 1 to 21 of 21

Thread: Gauges on RTL

  1. #1
    Very Active Member
    Join Date
    Aug 2015
    Location
    Canton, Ohio
    Posts
    1,143
    Spyder Garage
    0

    Default Gauges on RTL

    Somewhere in the forum there was a conversation regarding the analog guages being replaced and using the digital versions on the center display.

    i got excited for the possibility of using the slots for other purposes, but discovered my center group does not have the temp and fuel graphs.

    Is this because I have a 2013 RTL or do I need a software update that will put them on the screen?

    thank you in advance for all the learned experience that I get on this page!

    Joe

  2. #2
    Very Active Member
    Join Date
    Jul 2013
    Location
    Vestaburg Michigan
    Posts
    794
    Spyder Garage
    0

    Default

    I have a 2013 rtl , just unplug gauges. Then gas and heat bars will appear.

  3. #3
    Very Active Member jtoro1's Avatar
    Join Date
    Feb 2013
    Location
    port st lucie fl
    Posts
    723
    Spyder Garage
    0

    Default

    You have to disconnect the gauges and your digital will come up you could add a voltage gauge or anything else
    That's the way I have mine

  4. #4
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    It might take a momentary "Leap of Faith" , but everything will work out fine...
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  5. #5
    Active Member
    Join Date
    May 2015
    Location
    Upstate NY
    Posts
    225
    Spyder Garage
    0

    Default

    BOTH gauges need to be disconnected. You will find a single "free" wire and a plastic cluster of three wires for each gauge. Disconnect all of these on each gauge.

  6. #6
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,417
    Spyder Garage
    8

    Default

    The gauges on the 2014 are rock solid and I have not disconnected them. I disconnected the gauges on the 2010, and 2011 and went to digital. An easy fix for the non-mechanical.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red

  7. #7
    Very Active Member
    Join Date
    Aug 2015
    Location
    Canton, Ohio
    Posts
    1,143
    Spyder Garage
    0

    Default

    Quote Originally Posted by jtoro1 View Post
    You have to disconnect the gauges and your digital will come up you could add a voltage gauge or anything else
    That's the way I have mine
    AWESOME, I would love to put in a voltage guage in the round analogue holes, could I ask where to acquire such an item?

    Getting excited about this now.

  8. #8
    Very Active Member jtoro1's Avatar
    Join Date
    Feb 2013
    Location
    port st lucie fl
    Posts
    723
    Spyder Garage
    0

    Default

    Quote Originally Posted by Buckeye Bleau View Post
    AWESOME, I would love to put in a voltage guage in the round analogue holes, could I ask where to acquire such an item?

    Getting excited about this now.
    EBay 52mm gauges

  9. #9
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,378
    Spyder Garage
    1

    Default

    There is a video on here by Bob(finless) on how to do this and the gauge he ordered. I bought the same gauge, though I think that is not available now but another similar is. I have enjoyed mine,but I was informed by my dealer when he changed my battery that it reads 1/2 volt low. Don't know if this is true of others or not but something to be aware of.

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

  10. #10
    Active Member
    Join Date
    Jun 2013
    Location
    Winchester, KY
    Posts
    391
    Spyder Garage
    0

    Default

    I got mine from Cruzer Joe.

  11. #11
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by Brogers57 View Post
    I got mine from Cruzr Joe.

    Is it still working good?? I love mine and it has yet to fail.

    Cruzr joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  12. #12
    Active Member
    Join Date
    Jun 2013
    Location
    Winchester, KY
    Posts
    391
    Spyder Garage
    0

    Default

    Yes sir!


    Sent from my iPhone using Tapatalk

  13. #13
    Invalid Emails
    Join Date
    Jul 2014
    Location
    Rotonda West,FL
    Posts
    404
    Spyder Garage
    0

    Default

    So what different choices do we have?

    Sent From my Note 5

  14. #14
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by CapeSpyder View Post
    So what different choices do we have?

    Sent From my Note 5

    Easiest and most popular

    Dual USB Plug & Volt Meter, from there, the sky is the limit

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  15. #15
    Very Active Member
    Join Date
    Sep 2012
    Location
    Flushing , Michigan
    Posts
    896
    Spyder Garage
    0

    Default

    Quote Originally Posted by Buckeye Bleau View Post
    AWESOME, I would love to put in a voltage guage in the round analogue holes, could I ask where to acquire such an item?

    Getting excited about this now.

    http://www.ebay.com/itm/131672724611...%3AMEBIDX%3AIT

    ToM
    Keep it simple
    Life is good

  16. #16
    Member
    Join Date
    Mar 2016
    Location
    Illinois
    Posts
    29
    Spyder Garage
    0

    Default

    Will this also work for 2015 RTL ?

  17. #17
    Very Active Member
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    13,031
    Spyder Garage
    0

    Default

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 This is a great looking voltmeter which we have installed along with this USB https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1. For the USB you also need the black ring from JT's Machine Shop (spyderlovers sponsor)
    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  18. #18
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by Jolvyc View Post
    Will this also work for 2015 RTL ?

    Yes
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  19. #19
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    go with a digital voltmeter rather than the analog one, it is more accurate and looks better.

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  20. #20
    Very Active Member
    Join Date
    May 2013
    Location
    Stanton, ca
    Posts
    4,893
    Spyder Garage
    1
    2011 RT-S SM5 , Baja Ron Black

  21. #21
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,378
    Spyder Garage
    1

    Default

    Bob have you checked your volt meter lately? When I had my battery warrantied the dealer said mine was reading .5 volts low.

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •