You could have issues if you replace one ROTOR , I would recommend TWO from BAJARON, they will help you stop better and they well last longer and I'm quite sure TWO of His are LESS than one OEM from BRP.........Mike
I believe it is warped. I'm getting vibration in that wheel during braking. Suggestions?
Sent from my iPhone using Tapatalk
I would check the rotor for warpage before replacing it. Worn A-Arm bushings can give you the same effect as a warped rotor.
Originally Posted by danotech
If I did have to replace one what is your cost?
I only carry the EBC replacement rotors. It would be very bad to put just one on the front as the EBC rotors stop quite a bit better than the OEM rotors. You do not want uneven stopping power on the front wheels. So you'd need to purchase 2. You might look into a used OEM rotor. Though you may run the risk of getting someone else's problem.
A new OEM rotor will cost you about $250.00. The EBC rotors are $104.00 each delivered.
Another possibility is material transfer from the brake pads. If the warp test with a dial indicator shows only a few thousands deflection M/T is a possibility, A good sanding and cleaning will do the trick.
Kaos
Kaos----- Gone but not forgotten.
2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.