Results 1 to 4 of 4
  1. #1
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,214
    Spyder Garage
    0

    Default 2013 SRS Headlight Switch Stuck

    Can the headlight switch on the left handle bar of the 2013 STS be disassembled?

    My switch is very difficult to switch from Hi to Low beam.
    I'm hoping to be able to open the housing and replace the switch but can't find any R/R instructions.
    Any one have experience with this switch or the housing??
    Thanks, David C.

  2. #2
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default Well....

    Have not done a sypder and there may not be instructions cause they only sell the whole command, but I have taken many a command apart and repaired them through the years. Can be done needs a good amount of patience and a good memory of whats what and where it goes....
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  3. #3
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,264
    Spyder Garage
    0

    Default

    It is not a replaceable item. Whole assembly has to changed out to replace the switch. So you could take it apart and tell us what you find. If you do take lots of pictures. My guess after seeing some of the other switches. There are no open contacts in that assembly, all weather sealed. It would not cause any harm to shoot some lube in there and see if that helps. Mine is a little stiff also and would like to know how you make out.

    2018 F3 LIMITED

  4. #4
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,214
    Spyder Garage
    0

    Default Switch

    Thanks guys for the response.
    I will try some lube first. Final action will be to tear into the module if needed.
    Wish me luck. I'll post pictures...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •