-
Originally Posted by TroyboyRn
I looked on Lamonster's site and saw the led head lights for the f3 limited ss . Unlike most of his products there is no installation video. From what I've read this can be quite involved. Anyone know if there is a video of the installation. I find it works best for me if I can see it done.
Sent from my iPad using Tapatalk
Lamont does have a installation video on his fog lights....I believe it is on his Website....or maybe it was on YouTube....but there is on.
-
Active Member
Originally Posted by Hitman5363
Lamont does have a installation video on his fog lights....I believe it is on his Website....or maybe it was on YouTube....but there is on.
Thanks, but was asking about headlights which r a little bit more complicated to do. I have his fog lights, easy install especially with the video to help.
-
Originally Posted by CharlieIndia
Lamonster is sold out was wondering when he might get them back in stock, thanks for the info about electrical connection. According to BRP manual the front of the trike needs to come off to get at the bulbs, another ridiculous set-up.
Sorry, thought you were talking about the Fog Lights. Yes, the top of the bike needs to come off to get to the headlights. Note, when you remove the upper panel under the gauge assembly and windshield mounting area the wiring harness is attached to it and zip ties must be cut....be careful not to cut your harness....I did not re-assemble mine the same....I zip tied to other areas so if I ever remove it again I won't have the hassle. You are correct about BRP making it a pain to just replace headlight bulbs. Right side is easy as there is more room for your hands but the left is a pain.
-
-
I found that doing the Headlights were much easier then doing the fog lights.
-
Originally Posted by Tazzel
I purchased mine at Xenon Depot. What is different with Lamonster's?????
Xenon was also plug and play. Very simple.
Would still like that answer to this. Is Lamonster's Highlight kit better? Better quality? brighter LED's?? I am curious.
-
I cannot answer your question if Lamonts headlights are better, but I really like them. They seem to be really high quality and soooo much brighter than the oem halogens and combined with the fog lights they not only light up the road really good but they look really good also.
-
Very Active Member
Baloo is my name. Spyders are my game. Well, it's a doo-bah-dee-doo, yes, it's a doo-bah-dee-doo, I mean a doo-bee, doo-bee, doo-bee, doo-bee, doo-bee-dee-doo. And, well, now. Ha ha! What have we here?
2020 Petrol Blue Metallic RTL
-
Active Member
-
Very Active Member
LED HEADLIGHTS FROM TRICLED
I just installed the headlights from TricLED last night. It was a pain to get to the headlights but well worth it once the installation was finished. Now the light from the headlights matches the light from my LED foglights!! Much better than OEM's!👍😄
2020 F3 Ltd
Spyderpops Bumpskid
Spyderpops Brake/Run/Turn Signal LED's
Lamonster Garage LED Fog Lights and Headlights
2013 ST-S retired 1/9/16 at 25,061 miles
2015 F3S sold at 77,565 miles.
-
-
I purchased the BRP fog lights for the F3 then I changed the bulb to an LED bulb so that it would be a bright white light not yellow.
-
To all that chose TricLed products.. Thank you very much! For the past 6 yrs, we strive to deliver the best in LEDs and stand behind our products.
Sent from my iPhone using Tapatalk
-
Finished My install - how many hash marks?
Originally Posted by BLUEZL600EFI
Too funny so did I....
I have the F3-T, I noticed in this picture there is a "high left" flair mine has that too. I started with both bulbs level with the horizon. How many hash marks did you rotate each bulb from level and did you do both in the same direction. Love the lights but getting the bulbs rotated to right angle seems to be alluding me. I hate to have to go to trial and error. Thanks in advance guys.
-
Very Active Member
I also noticed the poorly aligned beams in the photo. What is up with that?
I installed the Cyclops Adventure Sports bulbs and they are super bright, easy to install on our RT, and no beam misalignment.
Is that misalignment unique to the F3 headlights?
-
Originally Posted by PMK
I also noticed the poorly aligned beams in the photo. What is up with that?
I installed the Cyclops Adventure Sports bulbs and they are super bright, easy to install on our RT, and no beam misalignment.
Is that misalignment unique to the F3 headlights?
I have not had time to align them yet. (I should have mentioned that)
I also have a loose housing on the left, even with the stock bulbs when lowered to correct height it would bounce. I had it set a tad high to keep it tight, it is was more noticeable with the LEDs. I need to have my dealer replace it under warranty one of these days. I tried everything to fix it but I think it's just a defective housing.
Last edited by BLUEZL600EFI; 05-18-2016 at 09:26 AM.
-
Very Active Member
Originally Posted by BLUEZL600EFI
I have not had time to align them yet. (I should have mentioned that)
I also have a lose housing on the left, even with the stock bulbs when lowered to correct height it would bounce. I had it set a tad high to keep it tight, it is was more noticeable with the LEDs. I need to have my dealer replace it under warranty one of these days. I tried everything to fix it but I think it's just a defective housing.
That's seems pretty crazy, hope you get it sorted out
-
Are these plug and play?
Sent from my iPhone using Tapatalk
-
[QUOTE=wolfeman220940;1131366]Are these plug and play?
Sent from my iPhone using Tapatalk[/QUOTE
More like a lot of disassembly, hurt knuckles, PLUG, swearing, reassembly, then PLAY
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|