-
-
Very Active Member
can I purchase this
Originally Posted by rworell
I'm wondering if I can purchase the inner pc that is attached to this black plastic fin that I have circled in red. Last night I noticed that the inner piece is just floating and the plastic pc's that hold the two together are busted.
Glue it? With what? or can it be purchased from BRP with out it costing $10,000 "LOL".
Thanks everyone.
I'm guessing that's ~ 2012 RT SE, this looks like what you need from
cheap cycle parts:
#35 LH Water Deflector Ass'y705003759
$30.99
May I guess that the part has been used as a foot rest; might be better in the long rung to get road pegs or floor boards; Seal is having a free shipping sale currently
Last edited by IGETAROUND; 04-30-2016 at 06:17 PM.
Reason: spelling
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
-
Very Active Member
THERE YOU GO!!! Couldn't have asked for a better or quicker response than that. Ain't this forum great?
-
Very Active Member
the parts are made from ABS plastic so you can go Lowes or Home Depot or your local home improvement store and in the plumbing dept get a small can of of ABS glue.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
ABS glue or have it plastic welded.
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
SpyderLovers Sponsor
Both!
Try a repair. If it does not work, you are out just a few dollars. If it does, follow up this post with a fix! Plan "B"? Buy a new one. Good luck! Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
JB Weld may also work for you. I had a post/tab break off the removable piece above that, and I used JB weld. It's now stronger than it was from the factory.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|