-
Very Active Member
Originally Posted by Wahrsuul
I got lucky, these were on my '14 RTS when I got it. need to figure out how to remove them to do work now....
You don't need to remove the vents to take off the Tupperware. There is a long bolt/screw at the front of the vent that screws into one of the wind wing holes that was taken off to do the install.
2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
Passenger Arm Rests, Windshield Air Wing
Baja Ron's Sway Bar & Spring Adjusters
Air Scoops, LaMonster's Hiway Pegs
Magnetic Mirror Mounts, Air Innovations Seat Cushion
Red Chrome pin striping on Black hood
Federal Formoza AZ01 front tires (they're GREAT)
Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
LED bars above radiator inlets
LED brake/running/turn signals on license plate frame
Tag-Along trailer
LED headlights LED fog lights (WOW)
2" x 2" Road Lights inside front fenders
7' x 10' Cargo trailer
Garmin 396 LM GPS
RLS Cat-delete resonator with China Akropovic muffler
New Banshee AGM
M3 TPMS on front tires
Remote Control for Heated Jacket and Heated Riding Pants
Analog Clock and Analog Volt Meter
Loose Nut Behind Handlebars
-
You can get these vents on Amazon for $81.99. Search for this. Can-Am Spyder Rt Vent Kit 219800388 New Oem. I installed them on my 2015 RT and didn't cut the hole out but let them feed the existing grill vent. They work great and dropped my normal temp gauge reading by about half a mark.
-
Active Member
Add the vents to my 14rts today didn't cut anything. Just removed inside heat panels and vents. I do have Doc's instructions. Don't forget to add heat foam to inside panels.20200401_110622.jpg
-
I have a 2018 RT and did not cut out anything. What a difference but miss it on cold mornings.
-
I can't seem to send you a PM, but would love the instructions for installing this vent kit. Please let me know how I can get you what you need to do so.
-
PM me your email and Ill send you what I used.
Eckhard
Spyder RT Ltd, 2011
-
-
Very Active Member
Can-Am Spyder Rt Vent Kit 219800388 New Oem on Amazon. Now costs $129.95
2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
Passenger Arm Rests, Windshield Air Wing
Baja Ron's Sway Bar & Spring Adjusters
Air Scoops, LaMonster's Hiway Pegs
Magnetic Mirror Mounts, Air Innovations Seat Cushion
Red Chrome pin striping on Black hood
Federal Formoza AZ01 front tires (they're GREAT)
Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
LED bars above radiator inlets
LED brake/running/turn signals on license plate frame
Tag-Along trailer
LED headlights LED fog lights (WOW)
2" x 2" Road Lights inside front fenders
7' x 10' Cargo trailer
Garmin 396 LM GPS
RLS Cat-delete resonator with China Akropovic muffler
New Banshee AGM
M3 TPMS on front tires
Remote Control for Heated Jacket and Heated Riding Pants
Analog Clock and Analog Volt Meter
Loose Nut Behind Handlebars
-
Very Active Member
I just found this in my bookmarks...
https://www.tmsparts.com/oem/canam/2...utm_medium=cpc
I don't know if the price is a current one.
2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
Passenger Arm Rests, Windshield Air Wing
Baja Ron's Sway Bar & Spring Adjusters
Air Scoops, LaMonster's Hiway Pegs
Magnetic Mirror Mounts, Air Innovations Seat Cushion
Red Chrome pin striping on Black hood
Federal Formoza AZ01 front tires (they're GREAT)
Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
LED bars above radiator inlets
LED brake/running/turn signals on license plate frame
Tag-Along trailer
LED headlights LED fog lights (WOW)
2" x 2" Road Lights inside front fenders
7' x 10' Cargo trailer
Garmin 396 LM GPS
RLS Cat-delete resonator with China Akropovic muffler
New Banshee AGM
M3 TPMS on front tires
Remote Control for Heated Jacket and Heated Riding Pants
Analog Clock and Analog Volt Meter
Loose Nut Behind Handlebars
-
I was wondering about adding the heat vent kit on my '17 RTL to help cool off the heat I feel coming thru the body on my legs. I see some people have added them an liked what they did. I would like to see some pictures of what they look like once they are installed on your spyders. All I can find is the kit parts an not a picture of them installed. If anyone has couple pictures that they can share I would really appreciate it.Thank you.
-
-
Here are some pictures of mine installed. I left the factory vent opening in the panels and didn't cut them out to start. That way if I didn't like them I would only have 4 small holes to fill and use touch-up paint on. Now that I've had them for about 10 months I really like them and I'm going to go back and cut out the opening to allow more air in. The current setup has dropped my temp but now I want to see if I can drop it more. Vent Front 1.jpgVent Front 2.jpgVent Left 1.jpgVent Left 2.jpgVent Left 3.jpgVent Right 1.jpgVent Right 2.jpg
-
Thank you all for the pictures of the vents added to your Spyder. All so thanks for links to other threads about the vents added an how you added wings for more air to rider. Thank you, Nathan in Yakima WA
-
Active Member
Did it make a big difference when you cut out the opening?
-
i haven't cut out the opening yet. I will post something once I do it.
-
I am also looking for the RT Vent installation instructions. Would it be possible to send me a copy also?
Thanks,
Mike
Update: Eckhard sent them to me today. Thanks for the help.
Mike
-
I finally cut the opening the rest of the way out. The engine still runs cooler than it did. We have 92+ degree heat right now so I think you hit a point where you can't see a major change when it is this hot. I like the look and know it is helping the bike run cooler. It also didn't cost an arm and a leg.
-
Finally got my heat vent kit for my RT. $72 from my dealer. As everyone else I need instructions to install them. Anyone with the instructions that would care to send them to me, PM me for my email address to send them to. Thank you. Nathan in Yakima WA
-
-
sduskin Thank you for the link to the install. Very much appreciated. Now I can get them put on my spyder this weekend. Nathan in Yakima, WA
-
Active Member
Just ordered the kit for my 19 RT from TMS Parts for $69.99 with free shipping.
https://www.tmsparts.com/oem/canam/2...utm_medium=cpc
I need it here in FLA since our daily temps have hovering around 95 degrees with matching humidity for the last few weeks.
We'll see how it works and hope for the best.
Knowledge is the accumulation and remembering data.
Wisdom is the effective application of it.
[img]https://www.spyderlovers.com/forums/maps/map.png?
-
Help. Need install directions for 2012 RTS. Thanks for any help.
-
PM me your email and Ill send you the instructions.
Eckhard
Spyder RT Ltd, 2011
-
New to spyders just purchased 2015 RTL need install instruction for vent kit
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|