Results 1 to 9 of 9
  1. #1
    Very Active Member Brentc's Avatar
    Join Date
    Mar 2015
    Location
    Brockport, NY
    Posts
    1,411
    Spyder Garage
    0

    Default BRP 622 Trailer. Need a favor

    As you can see my trailer is at the paint shop and unavailable. I was looking to replace the stock nose and tail emblems as part of the overhaul. It's a 2010 and I was hoping to find out are the nose and tail emblems the same size? And are they both approximately 2.75" in diameter (That's the size of my 2014 RTS emblems front and rear)? I found a couple here http://www.ebay.com/itm/Custom-Dynam...FWweMt&vxp=mtr that look nice and would like to inquire with the seller on their size. Any help appreciated, also if anyone know of better replacement emblems I am all ears......

    Attached Images Attached Images
    2022 RT Limited Dark Hyper Silver
    2014 RT-S Pearl White
    2010 BRP 622 Trailer Pearl White


  2. #2
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by Brentc View Post
    As you can see my trailer is at the paint shop and unavailable. I was looking to replace the stock nose and tail emblems as part of the overhaul. It's a 2010 and I was hoping to find out are the nose and tail emblems the same size? And are they both approximately 2.75" in diameter (That's the size of my 2014 RTS emblems front and rear)? I found a couple here http://www.ebay.com/itm/Custom-Dynam...FWweMt&vxp=mtr that look nice and would like to inquire with the seller on their size. Any help appreciated, also if anyone know of better replacement emblems I am all ears......


    Nose one is about 2.75, tail one is about an inch smaller

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  3. #3
    Active Member revjvegas's Avatar
    Join Date
    Aug 2012
    Location
    Houston, TX
    Posts
    495
    Spyder Garage
    0

    Default

    When I had mine painted, I got replacements from gearhead.com
    The rear logo part# 219902468 is 48mm and the front logo part#219903609 is 68mm.
    http://www.gearhead.com/oem-parts/ca...ls/59092/85300

    Hope that helps out.

  4. #4
    Very Active Member Brentc's Avatar
    Join Date
    Mar 2015
    Location
    Brockport, NY
    Posts
    1,411
    Spyder Garage
    0

    Default THANK YOU!!

    Thank you both. I'll check that web site.
    2022 RT Limited Dark Hyper Silver
    2014 RT-S Pearl White
    2010 BRP 622 Trailer Pearl White


  5. #5
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    I assume that you'll have it back in time for the SpyderFest caravan???
    Good Luck; we can't wait to see the results!
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  6. #6
    Very Active Member Brentc's Avatar
    Join Date
    Mar 2015
    Location
    Brockport, NY
    Posts
    1,411
    Spyder Garage
    0

    Default Cutting it close

    The local vocational tech shop is doing it as a class project. I stopped in today to see the progress, looking real nice. I told the teacher I will need it back for its amiden voyage and he said I should have it back the Friday before spyderfest. So that give me 1 day to install the new decals, and lights. Gonna be a busy weekend before spyderfest.
    2022 RT Limited Dark Hyper Silver
    2014 RT-S Pearl White
    2010 BRP 622 Trailer Pearl White


  7. #7
    Active Member RockyMountainRider50's Avatar
    Join Date
    Mar 2014
    Location
    CO
    Posts
    150
    Spyder Garage
    1

    Default

    Quote Originally Posted by Brentc View Post
    As you can see my trailer is at the paint shop and unavailable. I was looking to replace the stock nose and tail emblems as part of the overhaul. It's a 2010 and I was hoping to find out are the nose and tail emblems the same size? And are they both approximately 2.75" in diameter (That's the size of my 2014 RTS emblems front and rear)? I found a couple here http://www.ebay.com/itm/Custom-Dynam...FWweMt&vxp=mtr that look nice and would like to inquire with the seller on their size. Any help appreciated, also if anyone know of better replacement emblems I am all ears......

    Brent, this is Brock and my first recommendation would be Ebay or Amazon and I'm just curious on the estimated cost to have your RT-622 trailer painted. If you don't mind me asking? Considering the same thing here in Colorado.
    2012 RT LTD & RT-622 , Pearl White

  8. #8
    Very Active Member Brentc's Avatar
    Join Date
    Mar 2015
    Location
    Brockport, NY
    Posts
    1,411
    Spyder Garage
    0

    Default Class project

    Quote Originally Posted by RockyMountainRider50 View Post
    Brent, this is Brock and my first recommendation would be Ebay or Amazon and I'm just curious on the estimated cost to have your RT-622 trailer painted. If you don't mind me asking? Considering the same thing here in Colorado.
    Brock, I contacted our local tech school in October and asked if this would be a good class project. The instructor thought I'd would. Only charge materials, which is around $500. I couldn't ask for a better arrangement. I actually got to meet the student doing the job yesterday. He was pretty excited to be getting some tri coat experience.
    2022 RT Limited Dark Hyper Silver
    2014 RT-S Pearl White
    2010 BRP 622 Trailer Pearl White


  9. #9
    Very Active Member Brentc's Avatar
    Join Date
    Mar 2015
    Location
    Brockport, NY
    Posts
    1,411
    Spyder Garage
    0

    Default I think I found replacements

    Quote Originally Posted by revjvegas View Post
    When I had mine painted, I got replacements from gearhead.com
    The rear logo part# 219902468 is 48mm and the front logo part#219903609 is 68mm.
    http://www.gearhead.com/oem-parts/ca...ls/59092/85300

    Hope that helps out.

    Found a few sets on eBay and only one seller got back to me with an attempt at measurements. He held a tape measure next to package and sent me a picture. Based on my take off, it appears the smaller is 50 mm and the larger is 65 mm. Based on the measurements revjvegas noted above I'm thinking the difference could be the picture?
    Last edited by Brentc; 03-19-2016 at 11:50 AM.
    2022 RT Limited Dark Hyper Silver
    2014 RT-S Pearl White
    2010 BRP 622 Trailer Pearl White


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •