Adhesive Residue

[bronzeflex42]

I removed some graphics (stickers or decals) off my RT's saddle bags. What is the best stuff to use to remove the glue residue without damaging the paint?

[Fatcycledaddy]

I have found WD40 works great without damaging paint.

[SPECTACUALR SPIDERMAN]

rubbing alcohol or baby wipes

[Joe Spyder]

A product called "Goo Gone" works really well also.

[rpatsh]

I have found WD40 works great without damaging paint.

[jcthorne]

3M Adhesive Remover

[billybovine]

For me it seems if Goo Gone does not work WD 40 will. If WD 40 does not work Goo Gone will.

[Cruzr Joe]

All good suggestions

Cruzr joe

[Chupaca]

But if you don't go for the specific ones WD40 is your best bet. And it smells way better,,,,

[STELLING MAN]

I found WD-40 works almost every time for me..

[finless]

Goo Be Gone has acetone in it.... It will work on chrome and metal but for sure I would not use it on the plastic windshield. Might be OK on the paint but test it somewhere you won't notice first.

Bob

[4 MARIE]

All the removal schemes are okay. But... whatever you use, and no one else addressed this yet,
NEUTRALIZE after use. Have a bucket of soapy water and a mitt or whatever, and just the second
the adhesive is gone wash the heck out of the entire area.

[Bfromla]

rubbing alcohol or baby wipes

All is very time consuming. Get you elbows ready!! Please do Not try "goof off" or any other chemicals for removing gummy stuff. The alcohol will evaporate clean & leave no residue.

[billybovine]

Goo Be Gone has acetone in it.... It will work on chrome and metal but for sure I would not use it on the plastic windshield. Might be OK on the paint but test it somewhere you won't notice first.

Bob

.

According to the MSDS Goo Gone does not contain acetone.

http://googone.com/GooGone/files/ea/...4e3264f815.pdf

[jaherbst]

Adhesive Residue? Looks like it,s time for a new Spyder! WD 40 the only way to go!

Jack

[finless]

.

According to the MSDS Goo Gone does not contain acetone.

http://googone.com/GooGone/files/ea/...4e3264f815.pdf

Interesting.... OK... I think it use to though... Sure smells like Acetone.

Bob

[bronzeflex42]

I used WD-40 and a credit card. Sprayed on let sit for about 10 seconds, used card to scrape up the glue and it came right off. I washed it with soap and water afterwards. Thanks for all the suggestions and this forum.

[hotglue]

3M Adhesive Remover

I always have some in my shop!!!!

[Sccar]

Goo gone. I've used it for years with no issues. Works great. After I use it I normally wash the area then use some kind polish or wax

[Bfromla]

Update?

[ulflyer]

I recently debadged my '14 RT, OEM white, and removed a lot of vinyl tape in preparation for having it painted a diff color.

I wasn't concerned about damaging the paint and used a LOT of ACETONE to remove the sticky stuff. After getting all the panels thoroughly clean, with NO DAMAGE TO PAINT, I decided I liked the stark look and left it that way.

Gave it a couple coats of ICE spray wax and called it a day.

I'm not recommending this to anyone, and would suggest using something less hazardous to health, but if you have a persistent goo, you can try the Acetone.

[SNOOPY]

I removed some graphics (stickers or decals) off my RT's saddle bags. What is the best stuff to use to remove the glue residue without damaging the paint?

I just lick it off.

[bronzeflex42]

Update?

I gave an update in post #17. WD-40 worked like a charm.. thanks to this forum

[Marker]

3M Adhesive Remover

works great used it too remove glue from my 2010 RT when I peeled off the graphics to trade it on 2015 RT

[vided]