Results 1 to 12 of 12
  1. #1
    Very Active Member Fatcycledaddy's Avatar
    Join Date
    Jul 2015
    Location
    Dorr, michigan
    Posts
    1,336
    Spyder Garage
    1

    Default Automatic trunk lite

    I have seen a few rear trunk lite farkels on here and I thought I would post a little different idea.

    I removed the trunk outer skin by removing the 6 screws holding it on. The first pic has a $5 mercury switch installed with two sided tape, the second pic shows the routing of the wires. The third pic shows the LED strip mounted just below the velcro strip.Because of a three pic limit the next post will have the rest.
    Attached Images Attached Images
    2020 RT Limited , Petrol Blue

  2. #2
    Very Active Member Fatcycledaddy's Avatar
    Join Date
    Jul 2015
    Location
    Dorr, michigan
    Posts
    1,336
    Spyder Garage
    1

    Default

    First pic, I added a second velcro strip to the underside of the lip where the latch of the trunk is.
    I routed the wires from under the trunk lid with the wires from the third brake light. I connected it to the main power line that I ran from the battery to the trailer hitch with a inline fuse.
    The second pic shows the top lights on.
    The third pic shows the lights under the lip on.
    Now whenever I open the truck I have lights without a switch to flip and a switch to ever go out of adjustment.
    Attached Images Attached Images
    2020 RT Limited , Petrol Blue

  3. #3
    Very Active Member PW2013STL's Avatar
    Join Date
    Mar 2013
    Location
    Nashville, TN, Apache Junction, AZ
    Posts
    3,787
    Spyder Garage
    1

    Default

    Great idea!

    Looks good and I like the auto feature
    2021 Sea To Sky, 2020 RTL

    Isn't it weird that in AMERICA our flag and our culture offend so many people......
    but our benefits don't?
    2015 F3S , White & Blue

  4. #4
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    Great thinking and execution!
    But I'm just not getting my head wrapped around your power source...
    If I read this correctly; you used a brakelight harness for power?
    Did you go "upstream" from the switch?
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  5. #5
    Very Active Member Fatcycledaddy's Avatar
    Join Date
    Jul 2015
    Location
    Dorr, michigan
    Posts
    1,336
    Spyder Garage
    1

    Default

    Ooops, I didn't clarify, sorry. My trailer hitch is wired with a fused main power and ground line running from the battery to the back of the bike, then a set of relays operate the lights on the trailer. This way the there is no additional load on the bikes blinker system from the trailer lights. I also have this main power line charging the battery in my trailer as we ride, which powers the LED strip in the trailer for lights when we camp.

    I tapped into this main power line from the battery with a fused link to power the trunk light.
    2020 RT Limited , Petrol Blue

  6. #6
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    That even made sense to me: Thanks!
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  7. #7
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default

    That looks great and it's very original. I used a mercury switch on my '68 Barracuda to make a trunk light.

    Question - are there not solid state position sensors available now? I know that sort of technology is used in my garage door so I can tell their position remotely. If those aren't easily available where did you locate your mercury switch?
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

  8. #8
    Very Active Member Fatcycledaddy's Avatar
    Join Date
    Jul 2015
    Location
    Dorr, michigan
    Posts
    1,336
    Spyder Garage
    1

    Default

    I couldn't find a solid state switch. I did find a rolling steel ball switch, but I chose the old standby because of reliability.
    Here is a link
    http://www.ebay.com/itm/N-O-MERCURY-...sAAOSwLnlWn5-9
    2020 RT Limited , Petrol Blue

  9. #9
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default

    Perfect - I thought I'd finished farkling but you've inspired me.

    I like the looks of that switch - the one I installed on my Cuda was glass where you could see the mercury bubble and the 2 contacts. This one looks sealed which is great since we're dealing with mercury.
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

  10. #10
    Very Active Member Fatcycledaddy's Avatar
    Join Date
    Jul 2015
    Location
    Dorr, michigan
    Posts
    1,336
    Spyder Garage
    1

    Default

    Yes it is totally sealed or encapsulated in plastic.
    The other part of this is the mounting location. Because it is between the inside and outside shell of the trunk, it can't be hit with with anything, or the trunk closed on anything, so breakage is an extremely low, or non existent probability.
    2020 RT Limited , Petrol Blue

  11. #11
    Very Active Member OverHillAndDale's Avatar
    Join Date
    Sep 2014
    Location
    United States
    Posts
    844
    Spyder Garage
    0

    Default

    Waaay cool, I'm in.


    Sent from my iPhone using Tapatalk
    2020- RT Limited
    Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
    FOBO2 TPMS
    Aluma MCTXL trailer
    BRP hitch
    Big Bike Parts wiring harness
    Permanent Smile!!!

  12. #12
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,270
    Spyder Garage
    8

    Default

    Great idea. I like all of the lights. Now, if I only lived where I can ride in the dark.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •