-
Active Member
ISCI Handbrake
Any member using the ISCI handbrake know what model master cylinder is used in the setup?, I would like to know because of wanting to change the current on to one made of chrome, thanks for any information
Joseph
-
Active Member
Not sure, but I think they use a Harley master cylinder. If that is the case you should be able to get a chrome one.
-
Call them, I'm sure they would tell you
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
It's a Harley clutch cylinder they use.
Penny and Rick have owned many motorcycles starting in 1974 with Hondas, then to Suzukis, Gold Wings and ultimately Spyders.
74 Honda 360T (pair); 78 Suzuki GS 1000 (pair); 82 Honda Aspencade; 84 Honda 400; 87 Yamaha 1100; 99 Honda Valkyrie; 01 Suzuki Burgman(triked); 02 Honda GL 1800(triked); 10 Spyder RTSE; 11 Spyder RTSM; 12 Spyder RTSL (pair); 20 Spyder RTL (current)
-
I read an awsome thread http://www.spyderlovers.com/forums/s...13+spyder+rt-s His name is Stewart he did a great job improving/ upgrading his bike. It is a 14 page thread but in it he puts in a ISCI set up on his bike. Best of luck.
-
Very Active Member
Sportster
I believe they use a sportster master cylinder.
it was fun while it lasted.
-
Master cylinder
The master cylinder we use is off of a Road King or any other touring bike. The part # for the one we use is 44551-08E and you can get a chrome one.
Thank you
Jeff Kranzusch
ISCI SPYDER
Last edited by cruizr; 02-15-2016 at 01:35 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|