Rear lights

[mark_p67]

Hi all I've been building my own wheelchair rack to go on my Spyder ST Limited 2015, the only thing i need to do is purchase red stop/tail lights because when my chair go's on to the rack it covers the standard fitted lights, would appreciate as much info as possible thanks in advance Mark

[CMA/IBA_rider]

Hi all I've been building my own wheelchair rack to go on my Spyder ST Limited 2015, the only thing i need to do is purchase red stop/tail lights because when my chair go's on to the rack it covers the standard fitted lights, would appreciate as much info as possible thanks in advance Mark

Truck chrome shop has nice LED lights that can work. Have got a red LED light bar with brakelight in running lights.

[mark_p67]

do you have a link or website cheers

[Bfromla]

Homepage vendor Rivco "SOMA" leds ImageUploadedByTapatalk1455232240.057234.jpgthe smaller set in bag rack. (Brake only)
The long strips are Tricled also vendor (tail & brake)
Also can go wireless(brake only) http://www.jccomputac.com/site/mobil...gets.html#2638ImageUploadedByTapatalk1455232412.727868.jpg & stick just about anywhere. Share pics of your rack please


Sent from my iPhone using Tapatalk

[AY4B]

I was at Wallmart today looking for a shorty antenna, I did notice they had quite a selection of LED lighting, including stop lights for cheep. go check it out.

[Bfromla]

There was a post (last year)of some new type replacement brake lights that were motion sensative so theywould light up with engine braking & other motions. .......im looking for info

[BLUEKNIGHT911]

I was at Wallmart today looking for a shorty antenna, I did notice they had quite a selection of LED lighting, including stop lights for cheep. go check it out.

I doubt if He's coming over from England to go shopping .....Mike

[mark_p67]

[mark_p67]

still got to be finished, need to a brace from the bottom of frame to bike attach a few hooks then off to powder coat

[PistonBlown]

Thanks for posting the photos it makes it clearer to see what's likely to be blocked. Nice bit of work there.

I see you have the same 'bat' indicators with the red reflectors around them that we have here in NZ (in the US I believe they don't have the red reflector part). I'm guessing those are far enough out so you don't have to find a replacement for those as well?

One thing I would suggest is not mounting anything more on the rear mudguard if you can help it. The struts at the side have a habit of cracking after a while anyway and adding any extra weight doesn't help the situation. I'm guessing you should be you be able to mount lights on the frame you've built?

As you have panniers one option is to replace the reflectors with lights. There's a US company called AdMore Lighting that does a kit with rear + brake or even rear + brake + amber indicators. These are for the Givi V35 panniers put should also fit the Can-am ones are they are identical. I have seen them on a bike here and they worked well. http://www.admorelighting.com/side-m...D-light-kit-RY. Just checked and they have Spyders listed as a wiring option:-)

If you go DIY you need to be slightly careful tapping into the rear light circuit as nanny detects changes in draw on this circuit and will put you into limp home mode if it thinks the rear light bulbs have blown. You should be fine adding additional LEDs if you keep the original lights in place as the resistance should be sufficient to keep nanny happy - just be careful if your thinking of removing/replacing the original rear lights and just going LED.

[Bfromla]

still got to be finished, need to a brace from the bottom of frame to bike attach a few hooks then off to powder coat

. Looking at pics you should also look into saddlebag lights. Know Custom Dynamics offered a set would fit where the reflective tape is on bags. Dont know if it did tail & brake or just one.

[mark_p67]

They are just tail not with stop [emoji26]


Sent from my iPhone using Tapatalk

[Bfromla]

Any Update?

[mark_p67]

I've managed to find a rear light that will replace the number plate light and holder with this light from eBay http://www.ebay.co.uk/ulk/itm/182017163993


Sent from my iPhone using Tapatalk

[mark_p67]

Almost finished the rack, just put it back on to make sure it fits


Sent from my iPhone using Tapatalk