Page 1 of 2 12 LastLast
Results 1 to 25 of 30
  1. #1
    Active Member garageguy's Avatar
    Join Date
    Jan 2015
    Location
    Flint Hill VA
    Posts
    70
    Spyder Garage
    0

    Default 12v outlet in frunk has no power

    Took delivery of a new blue 2015 ST-LTD last week. Tried to hook a battery tender with a cigarette lighter connection to the 12v outlet in the frunk and no power. Changed the 5A fuse, tried both F6 (switched) and F7 (unswitched) for the fuse and nothing. Any ideas how to get to the wiring to the outlet or the back of the right hand fuse panel so I can troubleshoot?

    Many Thanks

  2. #2
    Very Active Member Brentc's Avatar
    Join Date
    Mar 2015
    Location
    Brockport, NY
    Posts
    1,411
    Spyder Garage
    0

    Default I could be wrong but

    Quote Originally Posted by garageguy View Post
    Took delivery of a new blue 2015 ST-LTD last week. Tried to hook a battery tender with a cigarette lighter connection to the 12v outlet in the frunk and no power. Changed the 5A fuse, tried both F6 (switched) and F7 (unswitched) for the fuse and nothing. Any ideas how to get to the wiring to the outlet or the back of the right hand fuse panel so I can troubleshoot?

    Many Thanks
    My understanding is that the fuse switching you talked about is for the 12 volt in the rear trunk. I do not know if you can charge through the frunk outlet in front? What many do, myself included, add a pigtail to the battery, which is located just left of that frunk,outlet behind the liner, and then plug your tender to that when needed.

    congrats on the new ride too!
    2022 RT Limited Dark Hyper Silver
    2014 RT-S Pearl White
    2010 BRP 622 Trailer Pearl White


  3. #3
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by Brentc View Post
    My understanding is that the fuse switching you talked about is for the 12 volt in the rear trunk. I do not know if you can charge through the frunk outlet in front? What many do, myself included, add a pigtail to the battery, which is located just left of that frunk,outlet behind the liner, and then plug your tender to that when needed.

    congrats on the new ride too!

    He has an ST, (no rear trunk)
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  4. #4
    Very Active Member Brentc's Avatar
    Join Date
    Mar 2015
    Location
    Brockport, NY
    Posts
    1,411
    Spyder Garage
    0

    Default Where are those glasses......

    Quote Originally Posted by Cruzr Joe View Post
    He has an ST, (no rear trunk)

    Dooh
    2022 RT Limited Dark Hyper Silver
    2014 RT-S Pearl White
    2010 BRP 622 Trailer Pearl White


  5. #5
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by Brentc View Post

    Dooh

    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  6. #6
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    It may not be hooked up. Dealer does that during assembly. On my 13 the dealer hooked up backwards. Burnt out a couple USB chargers before I caught on.
    The trunk has to come off if that's the problem.

    And for you RT people. The outlet in the front and the back are on the same fuse. So changing the fuse location changes both.
    Last edited by billybovine; 02-07-2016 at 05:16 PM.

    2018 F3 LIMITED

  7. #7
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier LoUiSiAna
    Posts
    5,995
    Spyder Garage
    1

    Default 12v outlet in frunk has no power

    Quote Originally Posted by Cruzr Joe View Post
    He has an ST, (no rear trunk)
    With that said fyi I added my pigtail to the post in frunk lays down out of way of latch & seal just fine fyi the post are 10mm
    ImageUploadedByTapatalk1454888333.316970.jpg as far as no power have you tried anything plugged into it? Charger, light, something simple.. It should have power without switch (ignition, mine does anyway)

    Sent from my iPhone using Tapatalk
    Last edited by Bfromla; 02-07-2016 at 06:42 PM.

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ,
    brake light strips, wide vue mirrors
    Rivico SOMA modulation brake leds
    sawblade mowhalk fender accents
    minispyder dash toy
    Lid lox
    KradelLock
    Pakitrack
    GENSSI ELITE LED H4 headlights
    FLO (Frunk Lid Organizer)
    BRP fog lights, trailer hitch
    SENA 20S EVO
    2013 STL , Stock Stock Black currant

  8. #8
    Active Member AZ Y Factor's Avatar
    Join Date
    Jan 2015
    Location
    Corona de Tucson, AZ
    Posts
    32
    Spyder Garage
    0

    Default

    I have 2014 STL. Take fuse 6 out and put it in 7, right fuse box which is the one on the left when facing the spyder. I would try another device (iPod or phone) besides the battery tender to see if you have power.


    2014 Spyder ST Limited - Black Currant

    "Yes it's fast and no you can't ride it"

  9. #9
    Very Active Member
    Join Date
    Mar 2013
    Location
    Oz
    Posts
    944
    Spyder Garage
    0

    Default

    My 12v in the frunk 13ST was never connected pre delivery. Frunk had to come off to connect it all up. All good now.

  10. #10
    Active Member garageguy's Avatar
    Join Date
    Jan 2015
    Location
    Flint Hill VA
    Posts
    70
    Spyder Garage
    0

    Default

    Quote Originally Posted by Bfromla View Post
    With that said fyi I added my pigtail to the post in frunk lays down out of way of latch & seal just fine fyi the post are 10mm
    ImageUploadedByTapatalk1454888333.316970.jpg as far as no power have you tried anything plugged into it? Charger, light, something simple.. It should have power without switch (ignition, mine does anyway)

    Sent from my iPhone using Tapatalk

    Yes, have tried a 12V air compressor with a cigarette adapter. Works fine on my RT. dead as a doornail on the ST. The workaround is to attach the BTender harness directly to the battery, but I would like to have a working 12V outlet.

    Removing the entire frunk assembly sounds like a PITA but haven't tried.

  11. #11
    Very Active Member
    Join Date
    Mar 2013
    Location
    Oz
    Posts
    944
    Spyder Garage
    0

    Default

    Don't forget the jumper posts under the black trim which pops off when trunk lid open. We hooked tender cables to these posts, ran cable up to under the centre y piece and fitted 12v outlet next to brake button. Works we'll for tender and I also use it for heated vest. Centre y piece is easy to remove. Had to buy a small 12v outlet as not much depth clearance, still a standard item from auto store.

  12. #12
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier LoUiSiAna
    Posts
    5,995
    Spyder Garage
    1

    Default

    Quote Originally Posted by garageguy View Post
    Yes, have tried a 12V air compressor with a cigarette adapter. Works fine on my RT. dead as a doornail on the ST. The workaround is to attach the BTender harness directly to the battery, but I would like to have a working 12V outlet.

    Removing the entire frunk assembly sounds like a PITA but haven't tried.
    & only having the bike a week the dealer should be helping you more. Sound like they missed a connection. Check the fuses like others have stated. I've always preferred the pigtail myself. Best of luck to ya

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ,
    brake light strips, wide vue mirrors
    Rivico SOMA modulation brake leds
    sawblade mowhalk fender accents
    minispyder dash toy
    Lid lox
    KradelLock
    Pakitrack
    GENSSI ELITE LED H4 headlights
    FLO (Frunk Lid Organizer)
    BRP fog lights, trailer hitch
    SENA 20S EVO
    2013 STL , Stock Stock Black currant

  13. #13
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by billybovine View Post
    It may not be hooked up. Dealer does that during assembly. On my 13 the dealer hooked up backwards. Burnt out a couple USB chargers before I caught on.
    The trunk has to come off if that's the problem.

    And for you RT people. The outlet in the front and the back are on the same fuse. So changing the fuse location changes both.
    Well i'll be damned ............. I got a 2015 RTL and there is not one in the front trunk at all, does this mean it still uses the same fuse???

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  14. #14
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier LoUiSiAna
    Posts
    5,995
    Spyder Garage
    1

    Default

    Quote Originally Posted by Cruzr Joe View Post
    Well i'll be damned ............. I got a 2015 RTL and there is not one in the front trunk at all, does this mean it still uses the same fuse???

    Cruzr Joe
    Are you sure Joe? You got yours from lamonster at spyderfest didnt ya? (Fyi I was there getting air in background, watching everyone drool over your bike)

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ,
    brake light strips, wide vue mirrors
    Rivico SOMA modulation brake leds
    sawblade mowhalk fender accents
    minispyder dash toy
    Lid lox
    KradelLock
    Pakitrack
    GENSSI ELITE LED H4 headlights
    FLO (Frunk Lid Organizer)
    BRP fog lights, trailer hitch
    SENA 20S EVO
    2013 STL , Stock Stock Black currant

  15. #15
    Active Member robtdonna's Avatar
    Join Date
    Jul 2014
    Location
    Ellijay, Georgia, United States
    Posts
    474
    Spyder Garage
    0

    Default

    Like Joe, no outlet in frunk, just one in trunk. 2014 RT
    Current: "Scarlett", 2017 Can Am F3-T, SE6, Intense Red Pearl.
    BRP heated grips, DIY brake light strip and turn signal strips, Chrome/LED brake light tag frame, SpyderPops bumpskid, Baja Ron swaybar and billet links, Lamonster Third Peg, BRP Adjustable Passenger Backrest, SpyderPops Missing Belt Guard, ShowChrome oversize brake pedal, TricLED foglights.


    Previous: "Synthia", 2014 Can Am Spyder RT, SM6, Pearl White.

  16. #16
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    Quote Originally Posted by Cruzr Joe View Post
    Well i'll be damned ............. I got a 2015 RTL and there is not one in the front trunk at all, does this mean it still uses the same fuse???

    Cruzr Joe
    Yes it does. The wires are there behind the front trunk and connected to the fuse box. You just don't have the optional socket installed.

    2018 F3 LIMITED

  17. #17
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    Quote Originally Posted by loisk View Post
    Don't forget the jumper posts under the black trim which pops off when trunk lid open. We hooked tender cables to these posts, ran cable up to under the centre y piece and fitted 12v outlet next to brake button. Works we'll for tender and I also use it for heated vest. Centre y piece is easy to remove. Had to buy a small 12v outlet as not much depth clearance, still a standard item from auto store.
    The OP has a 2015, so no jumper posts to hook up to like on a 2013.

    2018 F3 LIMITED

  18. #18
    Active Member kbwitt's Avatar
    Join Date
    Jun 2015
    Location
    AZ
    Posts
    417
    Spyder Garage
    0

    Default

    You paid how much for your new bike and your fixing it yourself. I think your dealer will be happy to solve problems for you.
    Kenn

  19. #19
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    Quote Originally Posted by robtdonna View Post
    Like Joe, no outlet in frunk, just one in trunk. 2014 RT
    Your dealer will be happy to sell you one.

    Attached Images Attached Images

    2018 F3 LIMITED

  20. #20
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    i don't need one in the front trunk, the one in the rear is fine.

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  21. #21
    Active Member garageguy's Avatar
    Join Date
    Jan 2015
    Location
    Flint Hill VA
    Posts
    70
    Spyder Garage
    0

    Default

    Quote Originally Posted by kbwitt View Post
    You paid how much for your new bike and your fixing it yourself. I think your dealer will be happy to solve problems for you.
    Kenn
    Dealer is too far for this nit. Was hoping for advice on a DIY fix

    Sent from my SM-T807V using Tapatalk

  22. #22
    Active Member ceyer69's Avatar
    Join Date
    Jun 2015
    Location
    Wake Forest, NC
    Posts
    106
    Spyder Garage
    0

    Default Frunk Power/Light

    I just noticed that my 2015 RT S has a light in the front trunk but I don't see it coming on? I assume the lid triggers it?
    2015 SE6 SS

    Elka Stage 2 front and rear shocks
    Lamonster Web Pegs
    General Altimax RT43 Rear Tire
    Lamonster LED Headlights and Fog lights
    Baker Wings
    Bajarons Sway Bar & Links
    Custom Dynamics Fender, Bright Sides and HMT Brake Lt
    Zumo 590
    CB
    Spyder Mudflap
    Lamonster drink holder
    Foam Grips
    Billet Axle Covers
    Stebel Air Horn
    SpyderPops Bumpskid
    SpyderPops belt guard
    SpyderPops Kotte Grills
    TriCLED LED Driving lights
    Magic Mirrors

  23. #23
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    5,869
    Spyder Garage
    0

    Default Frunk Light May Be Switched

    On my '14 RTS the frunk light is on the ignition key switched circuit.
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

  24. #24
    Very Active Member AY4B's Avatar
    Join Date
    Aug 2014
    Location
    Greenville Tx
    Posts
    2,470
    Spyder Garage
    1

    Default

    The 12 v power outlet is swiched. You have to have the key turned on for it to work. This rules out using it foe a battery tender. I don't think battery tenders came with cig lighter plugs anyway. Use the pigtail off the battery.
    2017 F3 Limited
    2017 F3 Limited , Lamonster Black Dymond brake pedal with brake rod at #5 Pure Magnesium Metallic

  25. #25
    Active Member Myersd802003's Avatar
    Join Date
    Feb 2016
    Location
    Alamogordo, NM
    Posts
    75
    Spyder Garage
    0

    Default

    Try it with the ignition switch on. If that doesn't work, then try running your engine to see if it works. The dealership has many ways of connecting it. I have two on my F3S. One that works when the engine is running and one directly connected to the battery that I will use the cigarette adapter for the battery tender. Your other option is to start taking the spyder apart to figure out if and how they hooked it up.

    2012 RSS (Wife's)
    2015 F3S (Mine)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •