-
Pragmatic Member
Emblem Diameter
Does anyone know the exact diameter of the BRP emblem on the frunk and trunk lids of the RT? I'm ordering custom ones and need to make sure my design is the correct diameter. I measured 2.625" but I just want to be sure before I order.
I think the guy who runs this forum sells his own emblems, so maybe he can chime in.
Thanks much.
Pam
- 2015 RT-S Special Series / Red & Black
- Baja Ron Sway Bar
- Utopia Backrest
- F4 Customs tall and wide vented windshield
- Stebel Super Loud Air Horn
- Baker Built Air Wings
- LaMonster Highway Pegs
- SpyderPops Exhaust Block Off Plate
- SpyderPops KOTT Grill
- SpyderPops Belt Guard
- Cat Bypass
- Laser Alignment by Squared Away
- TricLED Fender Lights
- General Altimax RT43 rear tire
- Dual flag holder
- Mud Flap
- A$$hole seeking missile system
-
Active Member
I know a 73mm diameter circular stick on automotive emblem fits perfect on the frunk.
let's ride safe & be careful out there,
Mike in Nawlins'
2014 Black SE6 Limited "Charlotte"
New Orleans Ride Captain
Patriot Guard Riders
-
Very Active Member
Originally Posted by Pampurrs
Does anyone know the exact diameter of the BRP emblem on the frunk and trunk lids of the RT? I'm ordering custom ones and need to make sure my design is the correct diameter. I measured 2.625" but I just want to be sure before I order.
Using a digital caliper and magnifying glass I come up with 68.8 mm, or 2.7 in. Both emblems are the same part number and it's easier to see the edge on the front one.
I think the guy who runs this forum sells his own emblems, so maybe he can chime in.
That would be Lamont!
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
I think the guy who runs this forum sells his own emblems, so maybe he can chime in.
That would be Lamont! [/QUOTE]
Pam[/QUOTE]
Fyi met a guy @ spyderfest did his own & gave me his spares 2" leaves lil room to play with but im happy with resultImageUploadedByTapatalk1454039567.576168.jpgImageUploadedByTapatalk1454039613.825579.jpg
ImageUploadedByTapatalk1454039707.975986.jpg
Sent from my iPhone using Tapatalk
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Pragmatic Member
Originally Posted by IdahoMtnSpyder
Using a digital caliper and magnifying glass I come up with 68.8 mm, or 2.7 in. Both emblems are the same part number and it's easier to see the edge on the front one.
Thank you!
Pam
- 2015 RT-S Special Series / Red & Black
- Baja Ron Sway Bar
- Utopia Backrest
- F4 Customs tall and wide vented windshield
- Stebel Super Loud Air Horn
- Baker Built Air Wings
- LaMonster Highway Pegs
- SpyderPops Exhaust Block Off Plate
- SpyderPops KOTT Grill
- SpyderPops Belt Guard
- Cat Bypass
- Laser Alignment by Squared Away
- TricLED Fender Lights
- General Altimax RT43 rear tire
- Dual flag holder
- Mud Flap
- A$$hole seeking missile system
-
-
Very Active Member
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|