-
LED fender light strips
Installing LED light stripes on fenders of 2012 RT S .My question is anyone use 3M adhesive promoter ? Or will a good cleaning with alcohol be enough for good adhesion ? I have seen directions both ways.
-
On a smooth painted surface like the fenders; the alcohol cleaning method seems to work just fine.
It's when you mount them on a surface that isn't all that smooth, that the "promoter" starts to strut it's stuff!
-
Very Active Member
Because it is out in the weather (especially in that area) the promoter would help.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Thanks ,that was what I was looking for someone that has done it before.
-
Very Active Member
Alcohol cleaning has worked good for all my decals. Fyi I find it best to let evaporate dry then apply whatever. If you can apply pressure to what you are sticking down for extended time also helps. Share pics if you can plz
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Very Active Member
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Alcohol may be okay by itself but then my question would be; then why do Tric-LED and Custom Dynamics include 3M promoter with all of their lights?
Use the promoter, better safe than sorry.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
Have used both. The promoter works way better.
Sent from my SAMSUNG-SM-G920A using Tapatalk
2007 M109R LE - To many MODS to list. Its cheaper that way!!!
-
Originally Posted by SpyderAnn01
Alcohol may be okay by itself but then my question would be; then why do Tric-LED and Custom Dynamics include 3M promoter with all of their lights?
Use the promoter, better safe than sorry.
As I recall; Reggy's instructions mention using it on the dark plastic pieces on the bikes. For the painted stuff; he supplies some alcohol swabs.
-
Very Active Member
alcohol prep is good enough just warm up the tape & area before applying
-
Originally Posted by Bob Denman
As I recall; Reggy's instructions mention using it on the dark plastic pieces on the bikes. For the painted stuff; he supplies some alcohol swabs.
He supplies alcohol pads and 3M promoter with all of his lights
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|