Help Moving the Garmen Zumo to the dash on my 13 RT

[Pat Clark]

Looking for someone either in SE Georgia or NE Florida to help me move the Garmin to the dash.
I'm pretty good with mechanical stuff but wiring is not my thing.
I don't use the Garmin much but as other folks here have seen the factory location is the pits. Takes your eyes off the road and the glare makes it near impossible to see. I can make the bracket and probably will to mount the Gopro and the Garmin.
I'd be willing to pay for someone's time.
Thanks, Pat

[Gordy]

look under JT machine shop on home page

[eddieshep999]

This thread may help

http://www.spyderlovers.com/forums/s...-High-Job-done

And this one

http://www.spyderlovers.com/forums/s...a-Zumo-up-high

[RonD]

I used the stock mount and just moved it from the handlebars to the dash. You can reroute the original wire without too much problems. The only thing I had to do was add an extension cord to the audio cable.

[Pat Clark]

Thanks gents, I'll take a look at the threads. May have found a guy close by who likes to mess with Spyders.
You guys are great. Thanks again.
Pat