Page 2 of 2 FirstFirst 12
Results 26 to 31 of 31
  1. #26
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default As I see it...

    If I were to use any car tire on the front, I would use just enough to keep the wear even but low enough to compensate for the stiffer sidewalls on the car tires. The choices are individual to the tire, model spyder and ryding style/location. Being the odd man out with good were out of the Kenda will stick with them...
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  2. #27
    Very Active Member ulflyer's Avatar
    Join Date
    Jun 2011
    Location
    Near Lexington, NC
    Posts
    2,218
    Spyder Garage
    0

    Default

    Oscar: what size Kumho's are you running? And did you have
    any difficulty fitting them under the fenders of your '15 Rt?
    Two Wheelers from 1963-2011

    Three Wheelers:
    2011 RT(Red)
    2014 RT(white)
    2016 F3T(red)
    2022 RT current ride(silver)
    __________________
    2016 Slingshot
    2018 Vanderhall
    2019 Slingshot

  3. #28
    Registered Users
    Join Date
    Mar 2016
    Location
    Cheyenne, Wyoming
    Posts
    92
    Spyder Garage
    0

    Default Dealer wrong?

    Quote Originally Posted by cyclekid58 View Post
    How does your dealer do alignments, most don't have the Rolo laser system that Squared Away and others doing laser have, I would have it checked by one of those folks and usually they won't charge if no changes are needed, I noticed mine gets a little squirrley if air pressure gets low, I run 20 in the fronts and tracks true, they got down to 17 once after sitting the winter and weren't checked and I noticed it right away, brought back to 20 and problem went away. If air pressure is up, then have it checked by someone with the true laser system, most dealers adjust to what their specs show and more often as not, when checked by laser its off.
    The specs the dealer uses are wrong?? How do you know if the dealer is doing it right? How is the lazer different. Are there specs to request from the guy doing the alignment?

  4. #29
    Registered Users
    Join Date
    Mar 2016
    Location
    Cheyenne, Wyoming
    Posts
    92
    Spyder Garage
    0

    Default Kumho fronts

    Quote Originally Posted by ulflyer View Post
    Oscar: what size Kumho's are you running? And did you have
    any difficulty fitting them under the fenders of your '15 Rt?
    I have 175/55/15 on my 14 rt land they are great. Tread contact is actually about 2" wider. The Kendra tires taper in to to tread from firewall
    Last edited by Michael82009; 03-21-2016 at 07:08 PM.

  5. #30
    Registered Users
    Join Date
    Mar 2016
    Location
    Cheyenne, Wyoming
    Posts
    92
    Spyder Garage
    0

    Default Chalk them

    Quote Originally Posted by OscarV View Post
    I just replaced the stock front tires with Kumho's. For those of you that have done the same, what psi are you running on the tires?

    Thanks.
    Best way is to chalk them

  6. #31
    Registered Users
    Join Date
    Sep 2015
    Location
    San Antonio
    Posts
    21
    Spyder Garage
    0

    Default Tire size

    Kumho KH16 155/60R15 74T

    No issues with them fitting in the fender.


    Quote Originally Posted by ulflyer View Post
    Oscar: what size Kumho's are you running? And did you have
    any difficulty fitting them under the fenders of your '15 Rt?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •