Check Engine light codes and solution

[spyderjo333]

We have a 2015 RT with 4,000 miles on it and we've had it for 6 months. The check engine light came on with limp mode. We got home ok since we were only about 12 miles away. We checked the codes online, since someone here or on another site told us about the Google play app for Spyder codes. We had a code of P340 and then we had one P0000. We called the dealer who suggested we come in. The dealer told us that since it was still under warranty,
BRP can pick up the tab for towing. So they checked it out and the problem was the CAM shaft sensor had gone bad. They sell Ski Doos also and they simply took one off of one of those in the showroom and replaced it. Problem solved.

[JayBros]

As long as your Spyder is under the original factory warranty BRP Roadside Assistance will cover towing service up to $200 per incident. If you need such service remember to tell the customer service rep you must have a rollback truck.

[Chupaca]

Roger Rattigan put together the code app for apple and android and it has helped many folks here and elsewhere. Glad your dealer was as helpful with getting you back on the road. He's a keeper..

[robmorg]

So they checked it out and the problem was the CAM shaft sensor had gone bad. They sell Ski Doos also and they simply took one off of one of those in the showroom and replaced it. Problem solved.

THAT is a customer conscious dealer!

[SpyderAnn01]

On our trip to Alaska this summer one of the 2014 RTs had the same problem. We went to one dealer in Anchorage who didn't even know where the battery and fuses on the 14 were located and another who knew what the problem was and who also took one off a display motor.

Sounds like your dealer is a keeper.

[spyderjo333]

We have a 2015 RT with 4,000 miles on it and we've had it for 6 months. The check engine light came on with limp mode. We got home ok since we were only about 12 miles away. We checked the codes online, since someone here or on another site told us about the Google play app for Spyder codes. We had a code of P340 and then we had one P0000. We called the dealer who suggested we come in. The dealer told us that since it was still under warranty,
BRP can pick up the tab for towing. So they checked it out and the problem was the CAM shaft sensor had gone bad. They sell Ski Doos also and they simply took one off of one of those in the showroom and replaced it. Problem solved.

Great Dealer!!!!!!!!!!!!!! The repair was made the same day the bike was dropped off. They even let us use a trailer to bring it home. WILMINTON POWER SPORTS YEA!!!!!

[DaBawse]

Thanks this helps. Sad part is my warranty just went out in April.